LED strip AGGE COB 24V - 15W/m / 3000K/4000K / IP20

• 3000K or 4000K color temperature
• Power: 15 W/m, 1350 lm/m
• Color rendering index CRI>9 0
• Voltage 24V
• Length 250 cm or 500 cm
• 200 cm connecting cable at both ends of the strip
• Watertightness: IP20

AGGE 24V LED strip is a high-quality 15 W/m (1350 lm/m) light strip for dry spaces (IP20). Its power makes it ideal for creating both direct and indirect lighting in high spaces, such as recessed into the ceiling of a living room. It can also be used as mood lighting in larger spaces. As a COB type strip, there are no individual LEDs visible, but it glows completely uniformly along its entire length, ensuring perfect spot-free and even lighting. Available in either a warm 3000K or neutral 4000K color temperature, in 250 cm or 500 cm rolls. The strip can be shortened or extended and dimmed according to your needs.

All AGGE 24V strips have a very high color rendering index (CRI>90), which means that colors are reproduced naturally and clearly. This is especially important indoors, as the colors of surfaces and furniture are reproduced exactly as they should be, and the lighting does not change the tone in one direction or the other. The strip's 24V operating voltage is a more energy-efficient option than traditional 12V strips, as the 24V strip halves the amount of current flowing in the strip, which results in less current loss. In addition, the 24V operating voltage also enables longer installations without voltage loss and light dimming at the other end.

The 200 cm long connecting cables with ready-made connectors at both ends of the strip are features appreciated by professionals, which make installation easier and enable a neat installation, as the connections can be hidden from view. In addition, the strip has ready-made cutting points every 5 cm, and thanks to the connectors at both ends, the rest of the cut strip is easy to use. When power is supplied from one end, the entire 5-meter roll can be switched on without the strip dimming at any point. Longer installations of up to 10 meters can be carried out by supplying power to the strip from both ends. Installation is made easier by the strong 3M tape on the back of the tape, which allows the tape to be attached to practically anywhere. Two-year (24-month) warranty!

Below, you can see images of remote controls designed for operating single-color LED strips. By clicking an image, you will be taken to the product page of the corresponding remote control:

What is a COB LED strip?

COB stands for Chip on Board, and refers to a LED strip in which individual LED dots are not visible like in cheaper strips, but the light is completely even along the entire length of the strip. COB LED strips with uniform illumination are suitable for situations where the strip is visible or where the strip otherwise requires the most even and high-quality lighting. With a COB strip, for example, a strip mounted near a wall or above a shiny tabletop is not reflected as individual light dots, but as a completely even strip of light.

LED strips enable a wide range of lighting solutions at home, in offices and in public spaces: lighting can be implemented either as so-called direct lighting (the light source is visible, e.g. an LED strip embedded in a slatted ceiling) or as so-called indirect lighting, i.e. the light source is not visible but the light is reflected, e.g. through a wall. LED strips can be used, for example, as a backlight for a bed headboard, chest of drawers or television. They can also be used to illuminate breakfast cabinets, kitchen worktops or steps or railings on staircases. LED strips can also be embedded, e.g. in a slatted ceiling or can be used to highlight recesses and designs in the ceiling or walls. Indirect lighting with LED strips can be created, e.g. in a plinth, under sauna benches, behind mirrors or even on top of kitchen furniture. LED strips allow you to play with light and implement even difficult lighting solutions, which is why they have become an important part of lighting design. Thanks to their easy installation, they can also be added to the interior at a later date.

Note! AGGE offers several LED strips with different power and features. You can check out the other strips in the series below:

• Led strip AGGE 24V 8 W/m, IP20 / 3000K/4000K / IP20
• Led strip AGGE 24V - 10W/m / 3000K/4000K/ IP20
• Led strip AGGE 24V - 15W/m / 3000K/4000K / IP20
• LED strip AGGE 24V - 8W/m / 3000K/4000K / IP65
• LED strip AGGE 24V - 10W/m / 3000K/4000K / IP65
• LED strip AGGE 24V - 15W/m / 3000K/4000K / IP65
• LED strip AGGE 24V CCT - 16W/m / 2700-6500K / IP20/IP65
• Led strip AGGE 24V RGB+CCT - 16W/m / 2700-6500K / IP20/IP65
• LED strip AGGE 12V - 10W/m / 3000/4000K / IP65

Specifications

• Product: AGGE 24V 15 W/m, IP20
• Intended use: Creating direct and indirect lighting in dry spaces
• Operating voltage: 24V
• Manufacturer's declared light output:
  • 3000K: 1350 lm/m
  • 4000K: 1500 lm/m
• Manufacturer's declared power: 15 W/m
• Color tone: 3000K or 4000K
• Color rendering (CRI): Ra90+
• Light beam angle: 120°
• Dimmable: Yes
• Dimensions: 2500/5000 x 1.6 x 10 mm (Length x Thickness x Width)
• Connection cable length: 2000 mm
• Operating temperature: -20°C - +40°C
• Lifespan: 50,000 hours
• Other: Pre-assembled connectors on both ends of the tape (Female DC 5.5 mm), 3M tape on the back for attachment
• IP rating: IP20
• Approvals: CE, RoHS
• SKU 19784, Electrical code: 4159908 (3000K/2500 mm)
• SKU 19785, Electrical code: 4159909 (3000K/5000 mm)
• SKU 19786, Electrical code: 4159910 (4000K/2500 mm)
• SKU 19787, Electrical code: 4159911 (4000K/5000 mm)
• Warranty: 24 months

Guides

You can find manufacturer's user manual by clicking here (opens in a new window).

• If you install a dimmer between the transformer and the LED strip (24V power), choose a normal transformer (not dimmable).
• If dimming occurs on the 230V side, e.g. with a TRIAC dimmer in a wall switch, choose a DIMMABLE TRANSFORMER.
• You can find control units to be installed between the transformer and the LED strip here ( Note! Not for wet rooms):
  • LED strip control unit, single color, AGGE Single Color Mini, 2.4 GHz
  • LED strip control unit, single color, AGGE Single Color, 2.4 GHz

Led strip installation guide Led strip dimming guide Led strip selection guide