LED strip remote control AGGE Dimming Rotary Panel, RF 2.4 GHz

The AGGE Dimming Rotary Panel is a stylish remote control for single-color LED strips, featuring an On/Off switch and a rotary switch that allows for stepless light output adjustment.   The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room. The light strip can be turned on or off by pressing the rotary switch in the middle of the remote control, and the light output can be adjusted by turning the roller.

The remote control can be screwed or taped to the wall using the included mounting screws and double-sided tape, or it can be placed on a table, sofa, shelf or practically anywhere, meaning it can be placed in the most convenient place for you. The remote control operates on one CR2032 battery (incl.), which provides the remote control with an operating time of up to approx. 1 year at a time, meaning you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that suits your needs:

• Led strip AGGE 24V - 8W/m / IP20
• Led strip AGGE 24V - 10W/m / IP20
• Led strip AGGE 24V - 15W/m / IP20
• LED strip AGGE 24V - 8W/m / IP65
• LED strip AGGE 24V - 10W/m / IP65
• LED strip AGGE 24V - 15W/m / IP65
• LED strip AGGE 12V - 10W/m /  IP65

Delivery content

• AGGE Dimming Rotary Panel Remote Control
• 1 x CR2032 battery
• Mounting tape
• Mounting screws
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming Rotary Panel
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 12 months
• Operating range: approx. 30 m
• Dimensions (with frame): 86 x 17 mm (Diameter x Depth)
• Dimensions (without frame): 50 x 50 mm
• IP rating: IP20
• Other: The package includes mounting screws and 2-sided tape
• Remote control electrical number: 2619805
• Remote control SKU: 20077
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the button on the remote control. The receiver indicator light will flash a few times to indicate successful pairing.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the rotary switch/knob in the middle of the remote control once to turn the LED strip on or off.
• Light intensity adjustment: Turn the knob/rotary switch on the remote control to adjust the light intensity.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.

You can find manufacturer's user manual by clicking here.