LED strip control unit AGGE Single Color Controller, RF 2.4 GHz

AGGE Single Color Controller is a control unit for single-color LED strips, which enables completely stepless brightness adjustment of the strip and remote control with a remote control. The controller is installed between the strip and the transformer/power supply so that the power supply wires are connected to the INPUT terminals of the control unit and the strip wires to the OUTPUT terminals. The control unit then receives commands from the remote control to change the light output of the strip and adjust the lighting . If desired, a separate push-button switch can also be connected to the other end of this control unit, which enables brightness adjustment from a wall switch in fixed installations.

The control unit operates at 2.4 GHz radio frequency and can be connected to any remote control operating at the same frequency. In an unobstructed area, the controller has a detection range of 30 meters. The control unit has built-in protection mechanisms against overheating, overload, short circuits and reverse polarity. Intended for dry indoor use (IP20). Two-year (24 months) warranty!

This controller is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that best suits your needs:

If you have a CCT light strip with adjustable color temperature or an RGB+CCT light strip with adjustable color temperature and RGB colors, you can find the suitable control units for them below:

One Single Color Controller can handle a maximum load of 8A. You can check the table below to see how many LED strips can be connected behind this controller.

Note! From the product options, you can choose either just the control unit or a complete set, which includes the control unit as well as a remote control of your choice, designed for controlling single-color LED strips. Below you can see pictures of the different remote control options:

AGGE Dimming Touch Wheel	AGGE Dimming Touch Slide	AGGE Dimming One-Key	AGGE Dimming Rotary Panel

AGGE Dimming 4-key Panel	AGGE Dimming 4-button	AGGE Dimming 4-zones	AGGE Dimming Wall Mount Touch Panel 4-zones

Specifications

• Product: AGGE Single Color Controller
• Purpose: Control of LED strip functions
• Operating voltage: 5-36V
• Maximum load: 8A
• Operating range: 30 m
• Compatible with single-color LED strips
• Operates on 2.4 GHz radio frequency
• Dimensions: 97 x 33 x 18 mm (Width x Height x Depth)
• Operating temperature: -30°C - +55°C
• IP rating: IP20
• Approvals: CE, RoHS, RED
• Control unit electrical number: 2619810
• Control unit SKU: 20082
• Warranty: 24 months

Quick Guide

Install the LED strip in place. Install the transformer/power supply in place and make sure that the wires reach from the transformer to the strip. Connect the power supply to the INPUT connector on the controller and the light strip to the OUTPUT connector. Connect the transformer to a wall outlet or, in the case of a fixed installation, connect it to the mains. Pair the desired remote control with the controller according to the remote control instructions and ensure that the connections are functional.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.