LED strip remote control AGGE Dimming One-Key, RF 2.4 GHz

AGGE Dimming One-Key is a modern small remote control for single-color LED strips, which allows you to turn the strip on and off and adjust the light output continuously. The remote control operates at a 2.4 GHz radio frequency and can be paired with any LED strip control unit operating at the same frequency. Together with the control unit, the remote control enables easy and effortless control of the strip, which means that in order for the remote control to work, it always needs a control unit connected to the strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the remote control has an operating range of approx. 30 meters, which means that it allows remote control of the strip, even from across the room.

The package includes a round bracket designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The bracket can also be drilled or taped to any flat surface, so you can place the controller in the place that suits you best. The remote control is also attached to the bracket with a magnet, so it can be easily removed from the bracket for use or to change the batteries, and then returned to its place, so it is always safe. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, so you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Available in black or white. Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that suits your needs:

• Led strip AGGE 24V - 8W/m / IP20
• Led strip AGGE 24V - 10W/m / IP20
• Led strip AGGE 24V - 15W/m / IP20
• LED strip AGGE 24V - 8W/m / IP65
• LED strip AGGE 24V - 10W/m / IP65
• LED strip AGGE 24V - 15W/m / IP65
• LED strip AGGE 12V - 10W/m /  IP65

Delivery content

• AGGE Dimming One-Key Remote Control
• 1 x CR2032 battery
• Wall mount with magnet
• Mounting tape for wall mount
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming One-Key
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 24 months
• Operating range: approx. 30 m
• Dimensions: 43 x 17 mm (Diameter x Depth)
  • Mounting hole spacing: 26.5 mm
• IP rating: IP20
• Remote control electrical number: 2619803 (black) / 2619804 (white)
• Remote control SKU: 20075 (black) / 20076 (white)
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the On/Off button on the remote control briefly. The receiver indicator light will flash a few times to indicate successful pairing.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the remote control once to turn the LED strip on or off.
• Light intensity adjustment: Press and hold the power button to adjust the light intensity.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.