LED strip remote control AGGE Dimming 4-zones, RF 2.4 GHz

AGGE Dimming 4-zones is a modern remote control for single-color LED strips. The controller has four different zone buttons, which allow you to control different light strips or groups of light strips either together or separately. By linking, for example, the kitchen plinth lights behind the "Zone 1" button and the intermediate room lights behind the "Zone 2" button, only some of the lights in the room can be turned on or off. The zone buttons can also currently be used to control all the LED strips in the home by installing the lights in different rooms behind different buttons, which means you don't need multiple remote controls to control different lights. The same buttons also work to adjust the light output, and they also allow you to save your own lighting settings in the remote control's memory.

The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room.

The package includes a round bracket designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The bracket can also be drilled or taped to any flat surface, so you can place the controller in the location that suits you best. The remote control is attached to the bracket with a magnet, so it can be easily removed from the bracket for use or to change the batteries, and then returned to its place, so it is always safe. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, so you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Available in black or white. Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that suits your needs:

• Led strip AGGE 24V - 8W/m / IP20
• Led strip AGGE 24V - 10W/m / IP20
• Led strip AGGE 24V - 15W/m / IP20
• LED strip AGGE 24V - 8W/m / IP65
• LED strip AGGE 24V - 10W/m / IP65
• LED strip AGGE 24V - 15W/m / IP65
• LED strip AGGE 12V - 10W/m /  IP65

Delivery content

• AGGE Dimming 4-zones
• 1 x CR2032 battery
• Wall mount
• Mounting screws
• Mounting sticker
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming 4-zones
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 24 months
• Operating range: approx. 30 m
• IP rating: IP20
• Dimensions: 75 x 75 x 18 mm (Width x Height x Depth)
  • Mounting hole spacing: 30 mm
• Other: The package includes a wall mount, mounting screws and mounting sticker.
• Remote control electric number: 2619809
• Remote control SKU: 20081
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and then press the desired remote control button shortly. The receiver's LED will flash a few times to indicate successful pairing. Pair all the light strips you want to control simultaneously to the same button.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the button of the strip light/group of strips you want to turn on once. Turn off in the same way.
• Light intensity adjustment: The light intensity can be adjusted by pressing and holding the button of the desired light strip/light strip group.
• Using zones : There are a total of four zones on the remote control. Press any button once to turn on the light strips installed behind a specific zone.
• Scene modes: Save the lighting settings on the light strip by pressing and holding the desired area button for 5 seconds, after which you can always access those settings by tapping that button.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.

You can find manufacturer's user manual by clicking here.