LED strip remote control AGGE Dimming 4-key Panel, RF 2.4GHz

AGGE Dimming 4-key Panel is a stylish remote control for single-color LED strips. The controller has two On/Off switches, stepless light output adjustment and two zone buttons (Zone), which allow different light strips or groups of light strips to be controlled separately. By linking, for example, the kitchen plinth lights behind the "Zone 1" button (left switch) and the intermediate space lights behind the "Zone 2" button (right switch), only some of the lights in the room can be turned on or off. The zone buttons can also be used to control all or most of the LED strips in the home by installing the lights in different rooms behind different buttons, which means you don't need multiple remote controls to control different lights.

The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room.

The remote control can be screwed or taped to a wall or other flat surface using the included mounting screws or double-sided tape. Of course, it can also be placed on a table, sofa, shelf or practically any surface, meaning that the remote control can always be placed in the most convenient place for you. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, meaning you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that suits your needs:

• Led strip AGGE 24V - 8W/m / IP20
• Led strip AGGE 24V - 10W/m / IP20
• Led strip AGGE 24V - 15W/m / IP20
• LED strip AGGE 24V - 8W/m / IP65
• LED strip AGGE 24V - 10W/m / IP65
• LED strip AGGE 24V - 15W/m / IP65
• LED strip AGGE 12V - 10W/m /  IP65

Delivery content

• AGGE Dimming 4-key Panel
• 1 x CR2032 battery
• Mounting tape
• Mounting screws
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming 4-key Panel
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 24 months
• Operating range: approx. 30 m
• Dimensions (with frame): 86 x 17 mm (Diameter x Depth)
• Dimensions (without frame): 50 x 50 mm
• IP rating: IP20
• Other: The package includes mounting screws and 2-sided tape
• Remote control electrical number: 2619806
• Remote control SKU: 20078
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and then press either of the power buttons on the remote control (Zone 1 on the left and Zone 2 on the right). The receiver LED will flash a few times to indicate successful pairing. Pair all the light strips behind the same zone that you want to control simultaneously.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control: The controller has two areas/zones: the left side is area 1 and the right side is area 2. The desired number of light strips can be paired behind each area according to the pairing instructions above, after which the light strips or groups of light strips can be controlled separately. The upper button turns the light strip on (I) and the lower button turns it off (O). The light intensity can be adjusted by holding down the power switch for the desired area.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.