LED strip remote control AGGE Dimming 4-button, RF 2.4 GHz

AGGE Dimming 4-button is a modern remote control for single-color LED strips, featuring an On/Off button, buttons for 10-step adjustment of the light output, and a button for quick switching between 10% and 100% light output. The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless adjustment of the light strip, meaning that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Multiple control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an unobstructed area, the remote control has a range of approx. 30 meters, meaning that it allows remote control of the light strip even from across the room.

The package includes a round bracket designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The bracket can also be drilled or taped to any flat surface, so you can place the controller in the place that suits you best. The remote control is also attached to the bracket with a magnet, so it can be easily removed from the bracket for use or to change the batteries, and then returned to its place, so it is always safe. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, so you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Available in black or white. Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

Delivery content

• AGGE Dimming 4-button
• 1 x CR2032 battery
• Wall mount
• Mounting screws for wall mount
• Mounting sticker for wall mount
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming 4-button
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 24 months
• Operating range: approx. 30 m
• Dimensions: 75 x 18 mm (Diameter x Depth)
  • Mounting hole spacing: 30 mm
• IP rating: IP20
• Other: The package includes a wall mount, mounting screws and adhesive mount.
• Remote control electrical number: 2619807
• Remote control SKU: 20079
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the On/Off button on the remote control briefly. The receiver indicator light will flash a few times to indicate successful pairing.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the top of the remote control once to turn the LED strip on or off.
• Light intensity adjustment: The light intensity can be adjusted in 10 steps using the arrow buttons on the right and left sides of the remote control. Quickly switch between 10% and 100% light intensity by pressing the button on the bottom of the remote control.