LED strip remote control AGGE Dimming Touch Wheel, RF 2.4 GHz

AGGE Touch Wheel is a modern remote control for single-color LED strips. The controller has an On/Off button for the light strip, switches for stepless and step-by-step light intensity adjustment, and separate area buttons that allow you to control different light strips or groups of light strips either together or separately. By linking, for example, the kitchen plinth lights behind button 1 and the intermediate space lights behind button 2, only some of the lights in the room can be turned on or off. The area buttons can also currently be used to control all the LED strips in the home by installing the lights in different rooms behind different buttons, which means you don't need multiple remote controls to control different LED strips. In addition, the remote control has four Scene buttons (S1, S2, S3 and S4), behind which you can save certain light settings so that when the button is pressed, the LED strip's light intensity always changes according to the setting and you don't have to adjust the light strip again every time.

The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room.

The package includes a sleek mount designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The mount can also be drilled or taped to any flat surface using the included mounting screws or mounting tape, so you can place the controller in the location that suits you best. The remote control is attached to the mount with a magnet, so it can be easily removed from the mount for use or battery replacement, and then returned to its place, so it is always safe. The remote control operates on two AAA batteries (included), which provide the remote control with an operating time of up to a year at a time, so you don't have to constantly change batteries. The remote control is intended for dry indoor use (IP20). Available in black or white. Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE Single Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that suits your needs:

• Led strip AGGE 24V - 8W/m / IP20
• Led strip AGGE 24V - 10W/m / IP20
• Led strip AGGE 24V - 15W/m / IP20
• LED strip AGGE 24V - 8W/m / IP65
• LED strip AGGE 24V - 10W/m / IP65
• LED strip AGGE 24V - 15W/m / IP65
• LED strip AGGE 12V - 10W/m /  IP65

Delivery content

• AGGE Touch Wheel
• 2 x AAA batteries
• Wall mount
• Mounting screws
• Mounting sticker
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Touch Wheel
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Operates on 2.4 GHz radio frequency
• Battery: 2 x AAA (included)
• Battery life: approx. 12 months
• Operating range: approx. 30 m
• IP rating: IP20
• Dimensions: 53 x 122 x 17.5 mm (Width x Height x Depth)
• Remote control electrical number: 2619800
• Remote control SKU: 20072
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the desired Zone button (1, 2, 3 or 4) on the remote control briefly. The receiver LED will flash a few times to indicate successful pairing. Pair all the light strips behind the same Zone that you want to control simultaneously.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the top of the remote control once to turn on or off all LED strips connected to the remote control.
• Brightness control: The brightness can be adjusted either by using the brightness control buttons or by sliding your finger on the round slide switch. The middle row of buttons allows you to quickly set the LED strip to either 25%, 50%, 75% or 100% brightness, and the slide switch allows you to adjust the brightness continuously.
• Using zones : There are four zones on the remote control (buttons 1, 2, 3 and 4). Press any number once to turn on the light strips mounted behind it. Control multiple zones simultaneously by tapping each desired number in quick succession. To turn off the lights in a zone, press and hold the number button for that zone for approx. 2 seconds.
• Scene modes: Save the lighting settings on the light strip by pressing and holding one of the four Scene buttons for 2 seconds, after which you can always access those settings by tapping the relevant Scene button (S1, S2, S3 or S4).

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.