LED strip controller AGGE Single Color Mini Controller, RF 2.4 GHz

AGGE Single Color Mini Controller is a control unit for single-color LED strips, which enables completely stepless brightness adjustment of the strip light and remote control with a remote control. The controller is installed between the strip light and the transformer/power supply using ready-made connectors, after which the control unit receives commands from the remote control to change the light output of the strip light and adjust the lighting. The control unit operates at a 2.4 GHz radio frequency and can be connected to any remote control operating at the same frequency. In an unobstructed area, the controller has a detection range of 30 meters. The control unit has built-in protection mechanisms against overheating, overload, short circuits and reverse polarization. Intended for dry indoor areas (IP20). Two-year (24 months) warranty!

This controller is designed to work with the single-color dimmable LED strips listed below. Explore our selection and find the LED strip that best suits your needs:

If you need to control a load over 5 A, are using a CCT or RGB+CCT strip, or want to control it with both a phone and a remote, you’ll find suitable controllers below:

One Single Color Mini Controller can handle a maximum load of 5A. You can check the table below to see how many LED strips can be connected behind this controller.

Note! From the product options, you can choose either just the control unit or a complete set, which includes the control unit as well as a remote control of your choice, designed for controlling single-color LED strips. Below you can see pictures of the different remote control options:

AGGE Dimming Touch Wheel	AGGE Dimming Touch Slide	AGGE Dimming One-Key	AGGE Dimming Rotary Panel

AGGE Dimming 4-key Panel	AGGE Dimming 4-button	AGGE Dimming 4-zones	AGGE Dimming Wall Mount Touch Panel 4-zones

Specifications

• Product: AGGE Single Color Mini Controller
• Purpose: Control of LED strip functions
• Operating voltage: 12-24V
• Maximum load: 60 W (12V) / 120 W (24V)
• Operating range: 30 m
• Compatible with single-color LED strips
• Operates on 2.4 GHz radio frequency
• Dimensions: 130 x 90 mm
• Operating temperature: -30°C - +55°C
• IP rating: IP20
• Approvals: CE, RoHS
• Control unit electrical number: 2619811
• Control unit SKU: 20083
• Warranty: 24 months

Quick Guide

About the transformer:

• If a driver/dimmer is used between the transformer and the strip (12V or 24V power), the transformer must be a normal (non-dimmable) model.
• If a wall dimmer is used, i.e. the dimmer is before the transformer (230V power), the transformer must be a dimmable model.

Note! Each controller needs its own transformer, so you cannot install multiple controllers behind one transformer. Multiple controllers behind one transformer may cause the light to flicker at some brightness levels.

Install the LED strip in place. Install the transformer/power supply in place and make sure that the wires reach from the transformer to the strip. Connect the power supply and the light strip to the ready-made connectors on the controller. Plug the transformer into a socket or, in the case of a fixed installation, connect it to the mains. Pair the desired remote control with the controller according to the remote control instructions and ensure that the connections are functional.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.

You can find manufacturer's user manual by clicking here.