LED strip AGGE 230V - 1500 lm/m, 15 m

AGGE 230V is an LED strip suitable for both professional and home use, powered directly from mains power (230V), which helps in general lighting of construction sites, construction and renovation sites and industrial areas. The LED strip can be used to illuminate, for example, stairs, scaffolding and other difficult spaces such as mine passages. The highly flexible and durable structure, the neutral color temperature and the strong light flow make the LED strip optimal for demanding daily use even when the working environment is challenging. The strip is completely waterproof according to the IP65 classification, so it can be used without worry even in damp rooms and outdoors all year round.

As a home use, the strip is excellent as lighting of, for example, gardens, terraces, garages and other indoor spaces. The LED strip can also be used, for example, at a cabin to illuminate the beach or the jetty, the strip has largely unlimited uses. AGGE 230V has a color rendering index, or so-called CRI value, of Ra>80, which reproduces natural light. The strip is therefore also suitable for places that rely on natural light, for example renovation sites during painting work. The LED strip has a pleasant color temperature of 4000K with a luminous flux of 1500 per metre. If necessary, the strip can be extended up to 100 meters or 1200 W. The LED strip distributes the light evenly and provides a wide illumination thanks to its lighting angle of 120°. The LED strip is supplied in a convenient roll equipped with wheels and a pull handle, from where the strip can be easily unrolled and rolled back for storage.

At one end of the LED strip is a 170 cm long power cord with plug, so the strip is ready to use. At the other end of the strip, there is a connector on which the strip can be extended up to 100 meters or up to 1200W.

As an accessory to the LED strip, there is a branching connector that can be used to branch two separate light strips from a power cord. In addition, there are also plastic brackets for attaching the strip to the wall or ceiling, or a mounting strip for a stylish installation of the LED strip.

ATTENTION! The LED strip is powered by 230V direct current (instead of alternating current), which means that it requires its own power cord (with a direct current transformer) when connecting to the mains. Unroll the entire strip before turning on the power to avoid overheating!

The LED strip is also available in following lengths:

• AGGE 230V - 1500lm/m, 3 m
• AGGE 230V - 1500lm/m, 10 m
• AGGE 230V - 1500lm/m, 20 m
• AGGE 230V - 1500 lm/m, 25 m
• AGGE 230V - 1500 lm/m, 50 m

Content

• LED strip
• Power cord with transformer
• Instructions for use

Technical specification

• Brand and model: AGGE 230V, 15 m
• Area of use: Spot lighting, home use outside and inside
• Luminous flux: 1500 lm / m, total. 22500 lm
  • Luminous flux measured by Valostore: 1250 lm / m
• Power: 230 V
• Stated power consumption: 12W / m, total. 180W
• Dimensions LED strip: 16 x 9 mm (Width x Height)
• Dimmable: No
• Color temperature: 4000 K
• Color rendering (CRI): Ra80 +
• Illumination angle: 120°
• Other: The strip can be extended up to 100 meters
• Protection class: IP65 (strip and connector) / IP44 (connector)
• Protection class: II
• Power cord length: 1700 mm
• Operating temperature: -20°C - +45°C
• Storage temperature: -10°C - +30°C
• Warranty: 12 months

Instructions for use

Connection of LED strips

1. Turn the contact cover counterclockwise to remove it from the first LED strip
2. Disconnect the power cable from the second set of LED strips
3. Connect the LED strip sets by connecting the female and male connectors. Tighten the connection cap.
4. Repeat the previous steps for the following sets of LED strips.
5. Finish by attaching the end cap to the last LED strip and tighten carefully to prevent it from loosening or water entering the cap.

ATTENTION! When connecting the LED strips, make sure that the power cord is not connected to the power outlet. Do not exceed the limit of 100 meters or the maximum power value of 1200 W specified by the manufacturer! Unroll the entire strip before turning on the power to avoid overheating!

Installation of LED strip

• Unroll the entire strip before turning on the power to avoid overheating! Make sure all connections are properly tightened. Mount the LED strip according to the instructions with the fixing accessories intended for mounting and make sure that the surface is free from hazardous substances such as water, flammable gases or fine dust. Connect the power cable to the 230V power outlet.