Remote controlled socket AGGE Wireless Remote Control Socket, IP44

AGGE Wireless Remote Control Socket is a remote-controlled socket suitable for indoor and outdoor use (IP44), which can be controlled from the power button on its side or with a separately sold remote control, motion sensor or wireless wall switch. The Wireless Remote Control Socket is simply plugged into a normal socket, after which the electrical device connected to it can be remotely controlled with one or all of the above-mentioned controllers. The remote-controlled socket allows, for example, LED strips, Christmas or other seasonal lights, a patio heater and, why not, even a car's heating cable to be switched on and off remotely. In addition to outdoor spaces, the socket can also be used indoors, and it is also a great tool in garages, warehouses, halls and other outdoor buildings where you want to turn lights on and off remotely, or connect, for example, battery-powered tools to charge or interrupt their charging.

AGGE Wireless Remote Control Socket is IP44 rated and suitable for both dry and wet areas. Up to 2300W of load can be connected to one socket, so even more powerful electrical appliances/lights can be used without any problems. The socket communicates with remote controls and/or motion sensors using a 433.92 MHz radio frequency, and currently it allows you to control a socket that is switched off from outside from indoors, as long as there are not too many obstacles in between, such as several walls. In addition to remote control, the socket can also be operated manually using the On/Off button on the side. A total of 8 motion sensors and/or remote controls can be connected to one socket.

Note! On this product page you can buy either a socket only, a socket and remote control, a socket and motion sensor, or a socket and wall switch. Select the set you want from the product options.

Delivery contents (Socket only)

• AGGE Wireless Remote Control Socket
• Instructions for use (FI/EN/SE/NO/DK)

Delivery content (Socket + Remote control)

• AGGE Wireless Remote Control Socket
• AGGE Wireless Remote
• Instructions for use (FI/EN/SE/NO/DK)

Delivery content (Socket + Motion sensor)

• AGGE Wireless Remote Control Socket
• AGGE Wireless Motion Sensor
• Instructions for use (FI/EN/SE/NO/DK)

Delivery content (Socket + Wall switch)

• AGGE Wireless Remote Control Socket
• AGGE Wireless Wall Switch
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Wireless Remote Control Socket
• Intended use: For example, installation of yard lighting and their wireless control
• Operating voltage: 230V
• Maximum load: 2300 W
• Radio frequency: 433.92 MHz
• Dimmable: No
• IP rating: IP44
  • Suitable for both indoor and outdoor use
• Requires a grounded socket
• Operating temperature: -30°C - +35°C
• Electrical number 2409600, SKU 20585
• Warranty: 12 months

Quick Guide

Plug the remote-controlled socket into a socket and prepare the remote control for use. Press and hold the On/Off button on the socket until the indicator light starts flashing slowly. Release the button. Press the On button for the desired group on the remote control until the indicator light stops flashing and remains on. The remote control and the socket have now been successfully paired. You can unpair by pressing and holding the On/Off button on the socket for 20 seconds.

You can find the manufacturer's installation and operating instructions by clicking here.