Remote control AGGE Wireless Wall Switch

AGGE Wireless Wall Switch is a remote control designed to control AGGE's remote-controlled socket, which allows you to turn a lamp or other electrical device plugged into the socket on and off remotely. The remote-controlled socket and remote control can be used to remotely control, for example, yard lights by plugging the lights into the socket (and the socket into a regular socket) and pairing the socket with the remote control. The remote control and socket both operate on the same radio frequency, so pairing them is easy. In an obstacle-free environment, the remote control has an operating range of up to 30 meters, so lights plugged into the socket can be turned on or off from indoors if necessary. The set can also be used to manage, for example, a car's heating cable or other electrical device, so the use is not limited to just lamps!

The AGGE Wireless Wall Switch is designed to work with the AGGE Wireless Remote Control Socket. The remote control is IP20 rated for dry indoor use, so it can be stored on a hallway table, a hat shelf or mounted on a wall with the included mounting screws. The remote control operates on a single CR2032 battery. One year (12 months) warranty!

Note! On this product page you can buy either just the remote control or a complete set that includes a remote-controlled socket in addition to the remote control.

Delivery contents (Remote control only)

• AGGE Wireless Wall Switch
• Instructions for use (FI/EN/SE/NO/DK)

Delivery content (Motion sensor + Socket)

• AGGE Wireless Wall Switch
• AGGE Wireless Remote Control Socket
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Wireless Wall Switch
• Intended use: Remote control of a socket outlet
• Power supply: 1 x CR2032
• Radio frequency: 433.92 MHz
• Operating range: 30 m in open area
• IP rating: IP20
• Operating temperature: 0°C - +35°C
• Electric number 2619831, SKU 20588
• Warranty: 12 months

Quick guide

Plug the remote-controlled socket into a standard socket and prepare the remote control for use (remove the battery insulation film). Press and hold the On/Off button on the socket until the indicator light starts to flash slowly. Press the ON button on the remote control once, after which the indicator light on the socket will flash briefly and then remain lit to indicate successful pairing. Test the pairing.

Note: An unlimited number of AGGE Wireless Remote Control Sockets can be paired with one remote control.