LED strip / Work light AGGE Lite 230V - 400 lm/m, 10 m

AGGE Lite is a high-quality and durable LED strip that is suitable for both indoor and outdoor use, both at home and on the construction site. The strip operates directly from the mains (230V), which makes it easy to install practically anywhere, and it can also be moved from one place to another without any effort if necessary. With the Lite strip/strips, you can create stylish and even lighting, for example, in the yard of a home or holiday home, and it can also be used as general lighting for warehouses, garages or yard buildings. AGGE Lite is also an excellent choice for construction sites and for lighting renovation sites, as their flexible and durable structure and even light distribution provide an optimal whole for working. The strip has a light output of 400 lumens per meter and the light opening angle is up to 120°, so there are no sharp shadows or dark corners around the strip. Available in either a warm 3000K color temperature suitable for mood and decorative lighting or a brighter 4000K color temperature suitable for working.

The AGGE Lite light strip can be attached to, for example, a terrace or patio, stairs, garden fence, plantings around walkways, house borders or, for example, the railings of a cottage beach pier. Indoors, the light strip can be installed practically anywhere, so there are unlimited uses! The color rendering index (CRI) of the light strip is over 80, so its light resembles neutral, eye-pleasing natural light, which is ideal both for general lighting and for tasks that require precision. If necessary, the light strip can be extended up to a length of over 100 meters (600W), so the lighting can always be modified to suit the use. The strip has 60 LEDs per meter, and it is completely waterproof according to the IP65 classification, so it can be used without worry even in damp rooms and outdoors, regardless of the season.

As accessories for the LED strip, an extension cord is available to be installed between the strip and the power cord or between two strips, which allows the strip to start further from the socket, or for example to safely cross paths on construction sites. In addition, plastic brackets are available to attach the strip to a wall or ceiling to hang it. A mounting rail is also available for attaching the strip, which allows it to be installed neatly practically anywhere. Magnetic cable clips can also be used for fastening, which are available in both 22 mm and 31 mm sizes. If necessary, the power cord can also be purchased separately: Power cord AGGE Lite, 150 cm.

Note! The tape works with 230V direct current (instead of alternating current), which means that it requires its own power cord (with a direct current transformer) to be used when connecting to the mains. Straighten the entire strip before turning on the power to avoid overheating!

AGGE Lite light strips are available in 5 m, 10 m and 25 m lengths. Other available options can be found below:

• AGGE Lite 230V - 400 lm/m, 5 m
• AGGE Lite 230V - 400 lm/m, 10 m
• AGGE Lite 230V - 400 lm/m, 25 m

From this product page, you can buy a 10 m LED strip with a power cord or a 10 m extension piece for an AGGE Lite LED strip (not including a power cord. In addition, you can buy a set that includes a 10 m strip with a power cord and a power bank for the LED strip, which serves as an emergency backup in the event of a power outage, for example. You can find out more about the features of the backup power source here: AGGE Emergency Power Bank.

If you want to control the light strip remotely, you can purchase an AGGE remote-controlled socket set to accompany it, which allows you to turn the strip on or off from up to 40 meters away.

Delivery content (Strip with power cord)

• 1 x LED strip, 10 m
  • Either 3000K or 4000K depending on your choise
• Power cord with DC transformer
• Instructions

Delivery content (Extension, 10 m)

• 1 x LED strip, 10 m
  • Either 3000K or 4000K depending on your choise
• Operating instructions

Delivery content (Strip with power cord + Power Bank)

• 1 x LED strip, 10 m
  • Either 3000K or 4000K depending on your choise
• Power cord with DC transformer
• Operating instructions
• AGGE Emergency Power Bank

Technical information

• Product: AGGE Lite 230V, 10 m
• Intended use: Indoor and outdoor home use, construction site lighting
• Apparent light output: 400 lm / m, total 4000 lm
  • Light output measured by Valostore:
• Operating voltage: 230 V (direct current)
• Apparent power consumption: 4.5W / m, total 45 W
• Dimensions LED strip: 12 x 6.5 mm (Width x Height)
• Dimmable: No
• Color tone: 3000K or 4000K
• Color rendering (CRI): Ra80+
• Light opening angle: 120°
• IP rating: IP65 (tape and connections) / IP44 (plug)
• Protection class: II
• Power cord length: 1500 mm
• Operating temperature: -25°C to +45°C
• Storage temperature: -10°C to +30°C
• Approvals: CE (RoHS, LVD, EMC)
• Other: The tape can be extended up to 600W
• Warranty: 12 months

Quick guide

Connecting LED strips to each other

1. Turn the connector cap counterclockwise to remove it from the first LED strip
2. Disconnect the power cable from the second set of LED strips
3. Connect the LED strip sets by connecting the female and male connectors together. Tighten the connection cap.
4. Repeat the previous steps for the following sets of LED strips.
5. Attach the end cap of the tape and tighten carefully so that it does not come off and water does not get inside the cap.

NOTE! Make sure the power cable is not attached to the power plug when connecting the strips together. Do not exceed the manufacturer's maximum power value of 600W! You can't break the tape either. Unroll the entire strip before turning on the power to avoid overheating! 

Implementation of the LED strip

• Unroll the entire strip before turning on the power to avoid overheating! Make sure the LED strip connections are properly tightened. Install the LED strip according to the instructions and with the fixing accessories intended for fixing, and make sure that the environment is free of hazardous substances such as water, flammable gases or fine dust. Attach the power cable to the 230V power plug.

You can find the manufacturer's user manual by clicking here.