LED strip AGGE Dual 230V - 1500 lm/m, 25 m - Coil

The AGGE Dual 230V LED strip is a light strip suitable for both professional and home use, operating directly from the mains (230V), which helps with general lighting on construction sites, construction and renovation sites and industrial areas, for example. Unlike many other LED strips, the Dual strip has LEDs in both directions, meaning it spreads light 360° around it, creating completely even lighting that spreads over a wide area. The Dual light strip can be used to easily illuminate, for example, staircases, scaffolding and other difficult sites or even mine tunnels. The extremely flexible and durable structure, neutral colour temperature and bright light output make the strip optimal for demanding daily use even when the operating environment is challenging. The light is fully waterproof according to the IP65 classification and can withstand changing conditions very well, so it can be used without worry even in damp areas and outdoors regardless of the season.

In home use, the strip is ideal for lighting paths, driveways, fences, terraces, house edges or storage/garages. The light strip can also be used to illuminate the beach or pier at a cottage, for example, so there are practically no limits to its uses. The light pattern that opens in all directions allows for the creation of indirect lighting, for example, on ceiling or wall structures, so the same strip works as both an efficient light source and a decorative light! The color rendering index (CRI) of the strip is over 80, which corresponds very well to natural light. The color temperature of the AGGE light strip is natural, suitable for general lighting and working at 4000K. The light strip can be extended up to 100 meters (1200W) if necessary, so the lighting can always be adjusted to suit the needs of use. The strip has 180 LEDs per meter, and its light output is up to 1500 lumens per meter. The light has a full 360° opening angle, meaning the light strip distributes the light completely evenly around itself, providing illumination over a very wide area. The LED strip is delivered in a convenient reel with wheels and a pull handle, from which it is easy to disassemble for use and assemble back onto the roll for storage and transport.

The LED strip has a 170 cm long power cord with a plug pre-installed at one end, so the light strip is ready to use. Using the connector at the other end of the strip, the strip can be extended up to one hundred meters or 1200W, allowing you to illuminate an unimaginably large area at once.

As accessories for the LED strip, a splitter piece is available, which can be used to branch off two separate light strips from one power cord, and in addition, plastic brackets are also available, with which the strip can be attached to the wall or ceiling to hang. A mounting strip is also available for attaching the tape, which allows it to be installed neatly. Magnetic cable clips can also be used for fastening, which are available in both 22 mm and 31 mm sizes. There's also an emergency power bank available for the light strip, for example in case of power outages.

NOTE! The tape operates on 230V DC (instead of AC), so it always requires its own power cord when connected to the mains. Straighten the entire tape before connecting to the power to avoid overheating!

AGGE's 230V strips are also available in traditional versions with a 120° opening angle, which you can find below:

• LED strip AGGE 230V - 1500 lm / m, 3 m
• LED strip AGGE 230V - 1500 lm / m, 5 m
• LED strip AGGE 230V - 1500 lm / m, 10 m
• LED strip AGGE 230V - 1500 lm / m, 15 m
• LED strip AGGE 230V - 1500 lm / m, 15 m (Reel version)
• LED strip AGGE 230V - 1500 lm / m, 20 m
• LED strip AGGE 230V - 1500 lm / m, 25 m
• LED strip AGGE 230V - 1500 lm / m, 25 m (Reel version)
• LED strip AGGE 230V - 1500 lm / m, 50 m
• LED strip AGGE 230V - 1500 lm / m, 50 m (Reel version)

From this product page you can buy either a single LED strip with a power cord or a set that includes, in addition to the strip and power cord, a backup power source for the LED strip, which serves as an emergency backup, e.g. in the event of a power outage. You can find out more about the features of the backup power source here: AGGE Emergency Power Bank.

If you want to control the light strip remotely, you can purchase an AGGE remote-controlled socket set to accompany it, which allows you to turn the strip on or off from up to 40 meters away.

Delivery content (Ribbon with power cord)

• LED strip
• Power cord with transformer
• Instructions

Delivery content (Ribbon with power cord + PowerBank)

• LED strip
• Power cord with transformer
• Instructions
• AGGE Emergency Power Bank

Specifications

• Product: AGGE 230V, 25 m
• Intended use: Construction site lighting, home use outdoors and indoors
• Luminous flux: 1500 lm / m, total 37500 lm
  • Luminous efficacy measured by Valostore: 1250 lm / m
• Operating voltage: 230 V (DC)
• Rated power consumption: 12W / m, total 300 W
• Dimmable: No
• Color tone: 4000K
• Color rendering (CRI): Ra80+
• Light beam angle: 120°
• Watertightness: IP65 (strip and connections) / IP44 (plug)
• Protection class: II
• Dimensions LED strip: 16.3 x 9 mm (Width x Height)
• Power cord length: 1700 mm
• Operating temperature: -20°C - +45°C
• Storage temperature: -10°C - +30°C
• Other: The tape can be extended up to 100 meters
• Warranty: 12 months

Quick Guide

Connecting LED strips together

1. Turn the connector cap counterclockwise to remove it from the first LED strip.
2. Disconnect the power cable from the second LED strip set
3. Connect the LED strip sets by connecting the female and male connectors together. Tighten the connection cap.
4. Repeat the previous steps for the next LED strip sets.
5. Attach the end cap to the tape and tighten carefully so that it does not come loose and water does not get inside the cap.

NOTE! Make sure that the power cable is not connected to the power outlet when connecting the strips together. Do not exceed the manufacturer's stated limit of 100 meters or the maximum power rating of 1200 W! The strip cannot be cut either. Straighten the entire strip before connecting to the power to avoid overheating!

LED strip introduction

• Straighten the entire strip before connecting to the power supply to avoid overheating! Make sure that the LED strip connections are properly tightened. Install the LED strip according to the instructions and with the fixing materials intended for the installation, and make sure that the environment is free of hazardous substances, such as water, flammable gases or fine dust. Connect the power cable to a 230V power outlet.

You can find the manufacturer's user manual (FI/SE/NO/DK/EN) by clicking here.