LED strip controller AGGE CCT Color Controller, RF 2.4 GHz

AGGE CCT Color Controller is a control unit for LED strips with adjustable color temperature, which enables completely stepless brightness and color temperature adjustment of the strip and remote control with a remote control. The controller is installed between the strip and the transformer/power supply so that the power supply wires are connected to the INPUT connectors of the control unit and the strip wires to the OUTPUT connectors. After this, the control unit receives commands from the remote control to change the light output or color temperature of the strip and adjust the lighting. The control unit operates at a 2.4 GHz radio frequency and can be connected to any remote control operating at the same frequency. In an unobstructed area, the controller has a detection range of 30 meters. The control unit has built-in protection mechanisms against overheating, overload, short circuits and reverse polarization. Intended for dry indoor areas (IP20). Two-year (24 months) warranty!

If you have a single-color LED strip or RGB+CCT light strip, you can find the suitable control units for them below:

• Control unit AGGE Single Color Controller
• Control unit AGGE RGB+CCT Color Controller

One CCT Color Controller can handle a maximum load of 2x5A. You can check the table below to see how many LED strips can be connected behind this control unit.

Note! From the product options, you can choose either just the control unit or a complete set, which includes the control unit and a remote control of your choice, designed to control LED strips with adjustable color temperature. Below you can see pictures of the different remote control options.

This control unit and the remote controls above are designed to work with an adjustable color temperature CCT light strip.

Specifications

• Product: AGGE CCT Controller
• Purpose: Control of LED strip functions
• Operating voltage: 12-24V
• Maximum load: 2x5A
• Operating range: 30 m
• Compatible with LED strips with adjustable color temperature
• Operates on 2.4 GHz radio frequency
• Dimensions: 97 x 33 x 18 mm (Width x Height x Depth)
• Operating temperature: -30°C - +55°C
• IP rating: IP20
• Approvals: CE, RoHS
• Control unit electrical number: 2619817
• Control unit SKU: 20089
• Warranty: 24 months

Quick Guide

Install the LED strip in place. Install the transformer/power supply in place and make sure that the wires reach from the transformer to the strip. Connect the power supply to the INPUT connector on the controller and the light strip to the OUTPUT connector. Connect the transformer to a wall outlet or, in the case of a fixed installation, connect it to the mains. Pair the desired remote control with the controller according to the remote control instructions and ensure that the connections are functional.