LED strip remote control AGGE CCT 4-button, RF 2.4 GHz

AGGE CCT Dimming 4-button is a modern remote control for CCT light strips, featuring an On/Off button, 10-step adjustment of light output, and 5-step and stepless adjustment of color temperature.   The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room.

The package includes a round bracket designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The bracket can also be drilled or taped to any flat surface with the included mounting screws or mounting tape, so you can place the controller in the location that suits you best. The remote control is attached to the bracket with a magnet, so it can be easily removed for use or battery replacement, and then returned to its place, so it is always safe. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, so you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE CCT Color Controller control unit.

To control the LED strip with your phone as well as the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with a CCT LED strip that features adjustable color temperature.

Delivery content

• AGGE CCT Dimming 4-button
• 1 x CR2032 battery
• Wall mount
• Mounting screws for wall mount
• Mounting sticker for wall mount
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE CCT Dimming 4-button
• Purpose: Remote control of LED strip
• Compatible with CCT light strips
• Operates on 2.4 GHz radio frequency
• Battery: 1 x CR2032 (included)
• Battery life: approx. 24 months
• Operating range: approx. 30 m
• Dimensions: 75 x 18 mm (Diameter x Depth)
  • Mounting hole spacing: 30 mm
• IP rating: IP20
• Remote control electrical number: 2619816
• Remote control SKU: 20088
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the On/Off button on the remote control briefly. The receiver indicator light will flash a few times to indicate successful pairing.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the top of the remote control once to turn the LED strip on or off.
• Light intensity adjustment: The light intensity can be adjusted in 10 steps using the arrow buttons on the right and left sides of the remote control.
• Color temperature adjustment: The color temperature can be adjusted using the button on the bottom of the remote control. Tap the switch to adjust the color temperature in 5 steps. Press the switch all the way down to adjust the color temperature steplessly.