LED strip remote control AGGE RGB+CCT Touch Wheel, RF 2.4 GHz

AGGE RGB+CCT Touch Wheel is a modern remote control for RGB+ CCT light strips. The controller features an On/Off button for the light strip, switches for adjusting light output, color mode and light color, a switch for dynamic color change, and separate area buttons that allow you to control different light strips or groups of light strips either together or separately. By linking, for example, the kitchen plinth lights behind button 1 and the intermediate space lights behind button 2, only some of the lights in the room can be turned on or off. The area buttons can currently also be used to control all the LED strips in the home by installing the lights in different rooms behind different buttons, which means you don't need multiple remote controls to control different LED strips. In addition, the remote control has four Scene buttons (S1, S2, S3 and S4), behind which certain light settings can be saved so that when the button is pressed, the light output and color temperature of the LED strip always change according to the settings (e.g. for the morning, bright and eye-catching lights can be installed behind the button, while for the evening, a warm color temperature simulating a sunset and moderate light output can be installed).

The remote control operates on a 2.4 GHz radio frequency and can be paired with any LED strip control unit that operates on the same frequency. Together with the control unit, the remote control enables easy and effortless control of the light strip, which means that in order for the remote control to work, it always needs a control unit connected to the light strip as a companion. Several control units can also be connected to the same remote control, which makes it possible to operate all the LED strips in the home with the same remote control. In an obstacle-free environment, the operating range of the remote control is approx. 30 meters, which means that it allows remote control of the light strip even from across the room.

The package includes a sleek mount designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The mount can also be drilled or taped to any flat surface using the included mounting screws or mounting tape, so you can place the controller in the location that suits you best. The remote control is attached to the mount with a magnet, so it can be easily removed from the mount for use or battery replacement, and then returned to its place, so it is always safe. The remote control operates on two AAA batteries (included), which provide the remote control with an operating time of up to a year at a time, so you don't have to constantly change batteries. The remote control is intended for dry indoor use (IP20). Available in black or white. Two-year (24 months) warranty!

Note! To work, the remote control needs a companion LED strip control unit. From the product options, you can choose either just the remote control or a complete set that includes both the remote control and the AGGE CCT Color Controller control unit.

If you also want to control the LED strip with your phone in addition to the remote, use the AGGE 5-in-1 Color phone controller.

This remote control is designed to work with this LED strip, which features both adjustable color temperature (CCT) and RGB colors.

Delivery content

• AGGE RGB+CCT Touch Wheel
• 2 x AAA batteries
• Wall mount
• Mounting screws
• Adhesive sticker
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE RGB+CCT Touch Wheel
• Purpose: Remote control of LED strip
• Compatible with RGB+CCT strips
• Operates on 2.4 GHz radio frequency
• Battery: 2 x AAA (included)
• Battery life: approx. 12 months
• Operating range: approx. 30 m
• IP rating: IP20
• Dimensions: 53 x 122 x 17.5 mm (Width x Height x Depth)
• Remote control electrical number: 2619819
• Remote control SKU: 20091
• Warranty: 24 months

Quick Guide

Getting started: Open the remote control battery compartment and remove the insulating plastic between the battery and the remote control.

Pairing: Press the Match button on the receiver/control unit briefly and immediately press the desired Zone button (1, 2, 3 or 4) on the remote control briefly. The receiver LED will flash a few times to indicate successful pairing. Pair all the light strips behind the same Zone that you want to control simultaneously.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the top of the remote control once to turn on or off all LED strips connected to the remote control.
• Brightness adjustment: The brightness can be adjusted in 10 steps or infinitely. Use the 10-step adjustment by tapping the brightness buttons, which will change the brightness with each press. Adjust the brightness infinitely by holding down either brightness button.
• Color temperature adjustment: The color temperature can be adjusted in 11 steps or steplessly. Use the steps by tapping the "WW" and "CW" brightness buttons on the remote control. Adjust the color temperature steplessly by holding down either button.
• Light color adjustment: The light color can be adjusted either by sliding your finger on the colorful slide touch switch on the remote control or by pressing the RGB button, which has 24 different colors integrated.
• Dynamic Color Change: The light strip can be set to change color dynamically using the button on the bottom left. Adjust the speed of the color change with the adjacent rewind button.
• Using zones : There are two zones on the remote control (buttons 1, 2, 3 and 4). Press any number once to turn on the light strips mounted behind it. Control multiple zones simultaneously by tapping each desired number in quick succession. To turn off the lights in a zone, press and hold the number button for that zone for approx. 2 seconds.
• Scene modes: Save the lighting settings on the light strip by pressing and holding either Scene button (S1 or S2) for 2 seconds, after which you can always access those settings by tapping the relevant Scene button.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.