LED strip set AGGE 230V - 1500 lm/m, 100 m

AN EXTREMELY LONG SUPERSET!
UP TO 100 M OF STRIP!

Bright 100 m long LED strip set for large facade lighting, for example, for lighting plot edges, play areas, warehouses, long corridors, machine halls or even shopping centers! The set consisting of AGGE's high-quality 230V strip enables lighting a really large area with just one power cord that can be plugged into a socket. This makes efficient and modern lighting of the space unprecedentedly easy. AGGE 230V is a high-quality and durable LED strip that is suitable for both indoor and outdoor use, both at home and on construction sites. The strip operates directly from the mains, which makes it easy to install practically anywhere, and it can also be moved from one place to another effortlessly if necessary. The strip is delivered in two 50-meter rolls and comes with a Plug&Play-type power cord that can be plugged directly into a socket.

With a 100-meter strip set, you can easily illuminate, for example, fences surrounding a large yard, a path and stairs from the cottage to the lakeside sauna, playgrounds or why not even part of a sports field! 100 meters of strip is also enough to illuminate construction sites, bridges, underpasses, paths in camping or festival areas and various lines - the applications are practically unlimited! Thanks to its flexible and durable structure and even light distribution, the AGGE light strip offers bright, but soft lighting for both work and leisure. The light output from the strip is up to 1500 lumens per meter and the light opening angle is up to 120°, so there are no sharp shadows or dark corners around the strip. The light strip has a color rendering index (CRI) of over 80, so its light resembles neutral, eye-pleasing natural light, which is ideal for both general lighting and precision-demanding tasks. The strip has 180 LEDs per meter and is fully waterproof according to the IP65 rating, so it can be used safely in damp areas and outdoors regardless of the season.

As accessories, a splitter piece is available for the LED strip, which allows you to branch out one power cord to create two separate light strips, and an extension cord is also available, which can be installed either between the strip and the power cord or between two strips. In addition, the selection includes plastic brackets designed for 230V strips, which can be used to attach the strip to a wall or ceiling to hang it. A mounting strip is also available for attaching the tape, which allows it to be installed neatly. Magnetic cable clips can also be used for fastening, which are available in both 22 mm and 31 mm sizes. There's also an emergency power bank available for the light strip, for example in case of power outages.

Delivery content

• 2 x LED strip, 50 m
• Power cord with DC transformer
• Instructions

Specifications

• Product: AGGE 230V, 50 m
• Intended use: Construction site lighting, home use outdoors and indoors
• Luminous flux: 1500 lm / m, total 150,000 lm
  • Luminous efficacy measured by Valostore: 1250 lm / m
• Operating voltage: 230 V (DC)
• Rated power consumption: 12W / m, total 1200 W
• Dimmable: No
• Color temperature: 4000 K
• Color rendering (CRI): Ra80+
• Light beam angle: 120°
• Watertightness: IP65 (strip and connections) / IP44 (plug)
• Protection class: II
• Dimensions LED strip: 16.3 x 9 mm (Width x Height)
• Power cord length: 1700 mm
• Operating temperature: -20°C - +45°C
• Storage temperature: -10°C - +30°C
• Warranty: 12 months

Quick Guide

Connecting LED strips together

1. Turn the connector cap counterclockwise to remove it from the first LED strip.
2. Disconnect the power cable from the second LED strip set
3. Connect the LED strip sets by connecting the female and male connectors together. Tighten the connection cap.
4. Repeat the previous steps for the next LED strip sets.
5. Attach the end cap to the strip and tighten carefully so that it does not come loose and water does not get inside the cap.

NOTE! Make sure the power cable is not plugged into the power outlet when connecting the strips together. Do not exceed the manufacturer's recommended 100 meter limit or the maximum power rating of 1200W! The strip cannot be cut either. Straighten the entire strip before connecting to prevent overheating!

LED strip introduction

• Straighten the entire strip before connecting to the power supply to avoid overheating! Make sure that the LED strip connections are properly tightened. Install the LED strip according to the instructions and with the fixing materials intended for the installation, and make sure that the environment is free of hazardous substances, such as water, flammable gases or fine dust. Connect the power cable to a 230V power outlet.

You can find the manufacturer's user manual (FI/SE/NO/DK/EN) by clicking here.