Wiring harness XBB PP-CAN-FD
A wiring harness designed for the XBB PP-CAN-FD smart relay, which enables the installation of additional lighting in CAN-bus controlled cars without the need for an XBB Dongle control unit connected to the OBD port. Connects directly to the vehicle's CAN-Hi and CAN-Lo channels, equipped with one DT2 connector and one straight wire.
Select option:
Product Faq
A wiring harness designed for the XBB PP-CAN-FD smart relay, which enables the installation of additional lighting in CAN-bus controlled cars without the need for an XBB Dongle control unit connected to the OBD port. Connects directly to the vehicle's CAN-Hi and CAN-Lo channels, equipped with one DT2 connector and one straight wire.
The XBB PP-CAN-FD wiring harness is a wiring harness designed for the manufacturer's PP-CAN-FD smart relay, which enables the connection of additional lights to CAN-bus controlled vehicles without a separate Dongle controller connected to the OBD port. The relay can be connected to the wiring harness in a Plug&Play style and the wiring harness is connected directly to the vehicle's CAN bus, from which the relay captures the high beam signal and controls the additional lights according to the signal. The wiring harness is designed specifically to handle sensitive data signals, so it ensures a safe and reliable installation.
The wiring harness consists of the following parts:
- Red cable (pin 2): Positive terminal with M8 ring cable lug. Durable 4 mm² RKUB cable and ATO fuse holder
- Black cable (pin 6): Ground cable with M8 ring cable lug
- White and yellow cable (pins 1 and 3): CAN-Hi and CAN-Lo connection cables
- DT-2 connector: Auxiliary light connection (max. load capacity 180W. NOTE! A single output of the PP-CAN-FD relay can withstand a 10A load, so for connecting lights with a power exceeding 120W, the relay outputs must be connected together, resulting in a load capacity of 2x10A. However, it should be noted that the wiring harness connector withstands a max. load of 180W.)
- Output 2 (pin 5): Direct wire for connecting, for example, another additional light
- Single wire (pin 4): Analog input signal
The wiring harness is intended for use with the XBB PP-CAN-FD smart relay. On this product page you can purchase either the wiring harness alone or a complete set that includes the wiring harness and the PP-CAN-FD smart relay. You can find more information about the relay below:
XBB PP-CAN-FDSpecifications
- Make and model: Relay wiring harness XBB PP-CAN-FD
- Intended use: Connecting additional lights to can-bus controlled cars
- Operating voltage: 12V
- DT2 connector for additional light
- Maximum power: 180 W
- Fuse: Integrated fuse holder (ATO/steel fuse)
- Length of the cable between the relay and the additional light: approx. 1300 mm
- Warranty: 12 months
