Relay cable set Lazer i-LBA (Low Beam Assist), 12V

A complete relay wiring harness for Lazer's i-LBA (Low Beam Assist) technology-equipped auxiliary lights, which includes everything needed to connect one light equipped with the aforementioned technology. The wiring harness has a separate On/Off switch for LBA technology and a separate switch for switching the auxiliary light on and off, so all light functions can be operated effortlessly directly from the cockpit. The wiring harness has one output, meaning it is suitable for connecting one auxiliary light. The wiring harness is intended for Lazer's i-LBA intelligent auxiliary lights that are equipped with a DT-4 connector. Suitable for direct 12V power.

Lazer i-LBA technology enables flexible use of the additional light on well-lit road sections or when the car encounters oncoming traffic: when the high beams are turned off, the light goes into Low Beam Assist mode (if the mode is enabled). In Low Beam Assist mode, the forward-facing LEDs of the light are turned off, but the LEDs that illuminate the side with a wide beam remain on. The 2 detection sensors in the light read the road ahead 30 times per second and detect, among other things, oncoming traffic, reflective road signs and street lights, and other reflective surfaces.

Note: This wiring harness is only compatible with Lazer auxiliary lights equipped with i-LBA technology. The same wiring harness is supplied with the auxiliary lights.

Compatible additional lights

• Lazer Triple-R 1000 Elite i-LBA
• Lazer Triple-R 1250 Elite i-LBA
• Lazer Linear 18 Elite i-LBA

Specifications

• Make and model: Relay wiring harness Lazer i-LBA, 12V
• Intended use: Connecting additional lights equipped with Lazer i-LBA technology
• Connector: DT-4
• Operating voltage: 12V
• Fuse: 20A
• Fits all Lazer i-LBA technology auxiliary lights
• Warranty: 12 months

Quick Guide