Led bar Lazer Triple-R 1250 Elite i-LBA - Straight / 59 cm / 151W / Ref. 40

The Lazer Triple-R 1250 Elite i-LBA is a shockingly powerful led bar with a long reach. Some of the lamp's 36 LEDs are directed straight ahead with a slightly narrower light pattern, giving the Triple-R 1250 Elite i-LBA light an incredible range of 826m (@1 lux). The rest of the diodes, on the other hand, are directed more sideways with a much wider light pattern of up to 56°, which illuminates the edges of the road at short and medium distances. With its combined light cone, in combination with a luminous flux of up to 13,136 lm, an incredible performance for daily use is guaranteed.

New to the i-LBA model is Lazer's all-new Intelligent Low Beam Assist technology, which makes the led bar more practical compared to traditional led bars: when the vehicle's high beams are turned off, the led bar enters low beam assist mode (if the mode is activated). In this assistant mode, the led bar's forward-directed LEDs are turned off, but the diodes that shine broadly in the wall branch remain lit. This is made possible thanks to the led bar's two sensors that read the road surface 30 times per second and record e.g. oncoming traffic, reflective traffic signs and street lamps and other reflective surfaces.

A 3-second delay margin has also been included for low beam assist mode to be switched on, so that it does not cycle on and off in such a way that it can be perceived as flashing when passing objects detected by the sensor. After the margin has passed the car, it returns to low beam assist mode or high beam if the car's own high beam is on. This function can also be turned off with a switch in the wiring harness. In addition to continuous reading, the sensors are continuously calibrated, which enables the reading of the surrounding conditions, for example changing weather or light conditions, or even dirt on the led bar.

Note! The extra light's E-boost mode, which gives maximum effect, is not E-approved. The low beam assistant system, on the other hand, is so new that it is not yet regulated, which means that it is also not officially approved. In Sweden, we lack requirements for Emarking, but many extra light ramps sold here still have the mark because they are manufactured for the entire European market

Content

• Lazer Triple-R 1250 Elite i-LBA
• 2 x Rail mounts
• Low Beam Assist Relay Kit
• Connection and installation instructions

Contents (1 pc - Complete package)

• Contents (see above)
• Additional light holder for EU license plate, Purelux

Technical specification

• Brand and model: Extra light Lazer Triple-R 1250 Elite i-LBA - Straight / 59 cm / 151W / Ref. 40
• Area of use: As additional light for vehicles/work machines
• Reference number: 40 (E-boost and Low Beam Assist mode are not approved)
• Manufacturer's reported luminous flux: (E-Boost / E-approved): 13,136 lm / 3747 lm
• Manufacturer's reported range (E-Boost / E-approved): 826 m @ 1 lux / 452 m @ 1 lux
• Beam width (lateral): 56°
• Color temperature: 5000 K
• Protection class: IP67
• Power (E-Boost / E-approved): 151 W / 35 W
• Current consumption (E-Boost / E-approved): 10.5 A / 1.7 A @ 14.4 V
• Operating voltage: 10-32V
• Lifespan: Approx. 50,000 hours
• Weight: 2400 g
• Dimensions: 590 x 73 x 105 mm (Width x Height x Depth)
• Contact: DTP-4
• Materials: Aluminum, polycarbonate lens (lifetime warranty)
• E-approvals: ECE R 112 (Does not apply to Low Beam Assist or E-Boost mode)
• Country of manufacture: United Kingdom
• Warranty: 60 months

Wiring diagram