Weapon light ARMYTEK Parma C2 Pro - 1500 lm / 147 mm / Rechargeable / CR123A
Powerful weapon light that fits both Picatinny and Weaver rails without additional tools. The lamp produces a maximum light output of up to 1500 lumens and a 350 m narrow spot beam, which is optimized to make it easier to aim with a gun. Durable structure and easy user interface. IP68 rating.
Product Faq
Powerful weapon light that fits both Picatinny and Weaver rails without additional tools. The lamp produces a maximum light output of up to 1500 lumens and a 350 m narrow spot beam, which is optimized to make it easier to aim with a gun. Durable structure and easy user interface. IP68 rating.
The Armytek Parma C2 Pro is a powerful tactical weapon light that can be powered by either a rechargeable 18650 battery or two CR123A batteries. The lamp is equipped with a high-power LED, which, combined with a precision-machined reflector and a tempered glass lens, creates a maximum light output of 1500 lumens and a narrow spot beam that reaches up to 350 meters. Thanks to the bracket integrated in the light, the lamp can be attached to both Picatinny and Weaver rails without additional tools, and thanks to its small and low design, the light does not protrude from the profile of the weapon almost at all. Due to the light construction, it also does not change the gun's center of gravity much. In addition, Parma C2 Pro is equipped with an easy user interface, two power modes and a separate strobe flash, all of which can be operated with one finger. The light is also supplied with a remote control switch, which enables the lamp to be operated from different armatures.
The Parma C2 Pro comes with an 18650 li-ion battery, which currently offers a continuous operating time of 6.5 hours at a time, and for longer periods of use, the power source can be replaced with 2 CR123A batteries when the battery is empty, so that the operating time can be extended even indefinitely. The light does not need to be removed from the gun when changing the batteries, so changing the power source is effortless. Parma C2 Pro is equipped with an intelligent temperature regulation system, which reduces the light output when the temperature rises too high, so that the lamp or the battery cannot be damaged. In addition, the lamp is protected against water and dust according to the highest IP rating (IP68), and it can withstand drops of up to 10 meters. All in all, it is a high-quality, durable and efficient weapon light designed for the needs of both soldiers and hunters. 10-year (120-month) warranty!
Delivery contents
- Armytek Parma C2 Pro
- 1 x 18650 li-ion battery
- Remote control switch
- Picatinny and Weaver mounts for remote switch
- Velcro fastener for remote control switch
- Protective covers for the remote control switch connector
- 2 x Ties
- Mounting screws
- Hex key
- Spare O-ring
- Instructions
Technical information 
- Brand and model: Armytek Parma C2 Pro
- Purpose: As a weapon light, e.g. in a rifle
- Power source: 1 x 18650 battery / 2 x CR123A batteries
- Light output stated by the manufacturer: 1500 lm
- Range stated by the manufacturer: 350 m
- Operating modes: 2 + 1 Flashing
- Clutch type and location: Tactical rear clutch, clutch lever on the side
- Material and color: Hard-anodized aluminum alloy, black
- Dimensions: 147 x 43.3 x 41.3 mm
- Weight (with battery): 179.5 g
- Impact resistance: 10 m
- IP rating: IP68
- Withstands immersion up to 2 meters (for 5 hours)
- Other: Fits Picatinny and Weaver rails
- Warranty: 120 months
Operating hours (provided by the manufacturer)
- Turbo: 1500 lm -> 800 lm / 1 min + 1 h 45 min / 350 m
- High: 200 lm / 6 h 30 min / -
- Strobe: 1500 lm -> 700 lm / 3 min + - / -
Quick guide
To use: Tighten the head of the flashlight. To change the power source, unscrew the head of the lamp, install the battery or batteries following the polarity instructions and tighten the head of the lamp tightly.
Operation with tactical tail switch: Turn on the light by tapping the switch twice. Tap the switch once to turn off the light. Turn the Strobe on by pressing the switch three times in a row. Activate tactical mode by tapping the switch once and then pressing the switch down.
Operation with the switch lever: When the light is on, the Turbo lever is directed towards the user. The high power mode lever is in the middle position. The brightness can only be changed when the light is on, changing the position of the switch lever in Strobe mode does not change the brightness. When the light is off, it can be locked against accidental switching on by pushing the lever away from the user. If the lever is moved to another position while the light is on, the locking function is not activated.
