LED strip / Work light AGGE Handy Kit 230V - 830 lm/m, 10 m - Reel

AGGE Handy Kit is a rollable LED strip that works directly from power outlet (230V), suitable for both professional and home use, for example as general lighting in the home or cottage, construction and renovation sites and industrial areas. The light strip is attached with a handy coil, from which it can be pulled out when needed. In addition to permanent installations, the Handy Kit is also an excellent choice as a temporary lighting solution, as the tape can be reused after use and rolled back into the roll for storage or transport. The strip has many uses and also works for outdoor use, for example to illuminate garden fences, terraces, carports and walkways.

The LED strip has a pleasant and appealing color temperature of 4000K, which makes it an excellent light source for both work and home. Unlike other 230V AGGE strips, the Handy Kit is thinner and narrower in structure, and its power is slightly lower (8.9 W/m vs 12 W/m), thus it is also well suited as part of home lighting and for situations where a thicker strip is even too bright. Even if the strip has less power than more powerful AGGE strips, don't let it fool you: the strip is powerful enough to illuminate e.g. the yard, and it is more suitable as decoration/general lighting for e.g. terrace, as the version with more power may be too bright for this type of use. The highly flexible and durable structure together with the enclosure class IP65 make the LED strip a perfect choice even in challenging and humid conditions all year round.

The LED strip's CRI value, i.e. the color rendering index, is over 80, which corresponds to natural light. Therefore, the strip can be used at renovation sites to add additional light to painting jobs or other tasks that require precision. The LED strip is equipped with 120 LEDs per meter, and its luminous flux is 830 lumens per meter. The light pattern of the strip is 120°, which distributes the light evenly around it and provides lighting for a very wide area. In this way, even larger surfaces can be illuminated with a 10 meter strip. The Handy Kit can even function as the main light source at, for example, a renovation site. The AGGE Handy Kit is made to be very easy to use: Unroll the light strip from the coil, connect the plug to the socket and enjoy the light! Two year (24 month) warranty!

If you want to control the light strip remotely, you can purchase an Airam remote-controlled socket set to accompany it, which allows you to turn the strip on or off from up to 30 meters away.

Delivery content

• AGGE Handy Kit LED strip + Coil
• Power cable with AC->DC transformer
• Strap
• Manual

Technical specification

• Brand and model: LED strip AGGE Handy Kit 230V - 830 lm/m, 10 m
• Area of use: Construction site lighting, home use outside and inside
• Luminous flux: 830 lm/m, total 8300 lm
• Operating voltage: 230V (AC)
• Power consumption: 8.9W/m, total 89W
• Dimming: Not dimmable
• Color temperature: 4000 K
• Color rendering (CRI): Ra80+
• Beam angle: 120°
• IP rating: IP65 (strip and connections) / IP44 (connector)
• Protection class: II
• Strip length: 10 m
• Strip width: 7 mm
• Power cord length: 1500 m
• Coil dimensions: 384 x 340 x 45 mm
• Operating temperature: -25°C to +45°C
• Storage temperature: -10°C to +30°C
• Warranty: 12 months

Quick guide

Introduction

1. Make sure the led strip is not connected to the power connector.
2. Pull the strip completely out of the spool.
3. Make sure there are no dangerous substances such as water, flammable gases or fine dust around the light strip.
4. Connect the power cable to the 230V socket.

Note! The LED-strip cannot be shortened or extended! Unroll the entire strip before turning on the power to avoid overheating!