Keychain lamp Nitecore TINI2 - 500 lm / 42 mm / Rechargeable

Nitecore TINI2 is a new, incredibly small but very powerful mini lamp. Compared to the predecessor TINI, according to the manufacturer, the performance of the lamp has been increased by up to 32% - to a luminous flux of 500 lumens! As a compact and extremely light (18.8g) lamp, it is easy to carry around, and is easy to attach to house or car keys using the key ring. TINI2 is made of durable, hard-anodized aluminum alloy and is dust and waterproof according to enclosure class IP54. Overall, the Nitecore TINI2 is a perfect choice for anyone who needs a small, but when needed, extremely bright and portable lamp for occasional lighting needs!

Despite its small size, an OLED screen has been skillfully embedded in the lamp body. The screen shows the battery voltage, the power mode in use, the selected operating mode and the remaining operating time. The lamp is operated with two switches with which the light can be switched on and off via the switch and, if desired, switched to the lowest possible power mode (by holding down the switch when the light is off). By pressing the power switch, the lamp changes its light flux for each button press when the lamp is on (Ultralow - Low - Middle - High). The turbo power mode can be activated by holding down the power switch. This works both when the lamp is off and on. Thanks to this, the maximum luminous flux is always quickly available

One of the special features of the TINI2 lamp is its two different operating modes: demo mode and daily mode . The demo mode is intended for short-term lighting. In that case, the lamp works for 30 seconds each time it is used, after which it switches off automatically, if, for example, the power mode does not change (the OLED display shows the remaining operating time). In daily mode, the lamp does not turn off automatically, but must be turned off via the power switch. The lamp's basic setting is Demo Mode, and if the lamp is expected to be used for a long time, we recommend that you change the setting to Daily Mode. You can change the operating mode by holding down both switches on the lamp for a while.

The power source for the TINI2 lamp is a built-in 280 mAh Li-ion battery, which is quickly charged with a modern USB-C charging cable. The battery charging time from empty to full takes less than two hours! The charging port is located on the side of the lamp, under the silicone protective tab. According to the manufacturer, this battery offers a maximum of 60 hours of continuous use (in Ultra Low Power mode). The lamp's several built-in protection functions, such as temperature control, protect the lamp's components from damage and thus extend its lifespan. TINI2 meets the criteria for enclosure class IP54. It is thus protected against dust (not perfect tightness) and water splashes. Note! The lamp is charged with a USB-C charging cable, and any cable can be used for charging. It therefore does not need a separate cable, and therefore the lamp does not come with a charging cable.

Operating modes

• Demo mode: Operating mode intended for short-term lighting. The lamp works every time it is used for 30 seconds, after which it turns off automatically, if, for example, the power mode does not change (the OLED display shows the remaining operating time).
• Daily Mode: A mode suitable for basic daily use. In daily mode, the lamp does not turn off automatically, but must be turned off via the power switch.

Note! The lamp's default setting is Demo Mode. If the lamp is expected to be used for a long time, we recommend that you change the setting to Daily Mode. You can change the operating mode by holding down both switches on the lamp for a while.

Content

• Nitecore TINI2
• A key ring
• Instructions

Technical information

• Brand and model: Key ring lamp Nitecore TINI2
• LED: 2 x Osram P8
• Battery: 280 mAh Li-ion (built-in)
• Manufacturer's reported light output: 500 lm
• Manufacturer's reported range: 89 m
• Manufacturer's reported light intensity: 2000 cd
• Number of operating modes: 5
• Charging: USB-C
• Charging time: 1 h 45 min
• Dimensions: 25 x 12.5 x 42.3 mm (Width x Height x Length)
• Weight: 18.8 g
• Protection class: IP54
• Impact resistance: 1 meter
• Warranty: 24 months

Operating hours (provided by the manufacturer)

• Turbo: 500 lm / 89 m / 15 min (for temporary use)
• High: 200 lm / 56 m / 45 min
• Medium: 65 ch / 32 m / 2 h 30 min
• Low: 15 ch / 14 m / 8 hours
• Ultra low: 1 ch / 6 m / 60 h

Quick guide

On/off: Press the power switch (bottom button) once to turn the lamp on or off.

Change power mode: When the lamp is on, press the power switch so that the light flux changes with each button press in the following order: Ultra Low -> Low -> Middle -> High. The last used power mode remains in the lamp's "memory".

Change operating mode: The operating mode can be changed when the lamp is on or off. You can change the operating mode by holding down both switches on the lamp for a while.

Quick transition to ultra-low or turbo mode: When the light is off, press and hold the power button (bottom button) to activate the ultra-low power mode. When the light is on or off, press and hold the power switch (top button) all the way, which activates the Turbo power mode (when you release the button, the light returns to the so-called "basic power mode" last used).

Button lock: The lamp has two different button lock functions: Half lockout mode (Lockout 1) and Full Lockout mode (Lockout 2). In Half Lockout Mode, the lamp's power switch is programmed to be completely disabled, but Turbo Power mode can still be activated by holding down the power switch. When the lamp is in Full Lockout mode, both switches are programmed to turn off, in which case the lamp will not light at all. Full Lockout Mode is useful, for example, during transport, as it prevents the lamp from being turned on accidentally. Half lockout mode (Lockout 1 ) is activated by holding down the power switch (lower button) until the lamp's OLED display indicates that the function is active. Full Lockout mode (Lockout 2) is activated by holding down the power switch (lower button) until the lamp's OLED display indicates that the function is active (the display first shows Lockout 1 until it changes to Lockout 2). The key lock can be unlocked by first briefly pressing the power button and then immediately holding it down again (the OLED display shows when the key lock has been unlocked).