Headlamp Unilite HL-7R - 475 lm / Rechargeable

The Unilite HL-7R is a rechargeable headlamp with 475 lumen light output. The wide light pattern is well suited for working at close range. The lamp is also equipped with smart motion sensor technology. With the help of the infrared sensor, you can control the lamp "hands-free". This feature comes in handy when you have dirty hands after work or when it's very cold outside and you need to check the lamp without taking off your gloves! The motion sensor can also be turned off if desired, and then the HL-7R functions just like a normal headlamp.

The lamp's power source consists of a built-in 1800 mAh Li-ion battery, which provides 3 hours of burning time at the highest power setting. The lamp is charged through the USB-C charging port. The charging time from empty to full battery is about 2.5 hours, and the indicator on the lamp shows the charging status. The lamp's headband is pre-assembled, feels comfortable against the skin and is easy to adjust to suit the user. The lamp head can be angled 45° so that the light can be directed where you want.

Content

• Unilite HL-7R headlamp
• USB-C charging cable
• Manual

Technical specification

• Make and model: Unilite HL-7R
• Area of use: Headlamp
• LED: 1 x CREE / 2 x "side LEDs"
• Luminous flux (max): 475 lm
• Range (max): 99 m
• Power source: Built-in 3.7 V, 1800 mAh Li-ion battery
• Charging time: approx. 2.5 hours
• Weight: 94 g (incl. battery)
• Dimensions: 42 x 33 x 60 mm (H/D/W)
• Switch position: On top of the lamp
• Protection class: IPX5
• Warranty: 12 months

Burning time

• Spot High: 350 lm / 3 h / 99 m
• Spot Low: 125 lm / 7h 30 min / 55 m
• Spot and Flood: 475 lm / 2 h / 100 m
• Flood: 135 lm / 7h / 16m

Quick guide

If the lamp is to be used with the motion sensor, it needs to be activated through the right switch (seen from the front). If you wave your hand in front of the lamp, it lights up in Spot High mode, and when you wave again, the lamp turns off. The IR sensor detects the hand from about 15 cm away. To use the lamp as usual, switch off the motion sensor on the same switch. In the "normal" mode, you change the power mode by pressing the switch. The lamp switches between the power modes in the order: Spot High, Spot Low, Spot & Flood, Flood and OFF. When you use the lamp at the same power level for more than 3 seconds, pressing the switch turns the lamp off.