Headlamp Armytek C1 Pro Magnet USB - 1000 lm / Rechargeable

The Armytek Wizard C1 Pro Magnet USB is a very compact, yet powerful multi-functional light that is easily charged with the supplied magnetic USB charger. The headlamp has many different uses, such as fishing, cycling, running, etc. Wizard C1 Pro works with an 18350 Li-Ion battery (included) and it offers a luminous flux of 1000 lm (warm 930 lm) according to the manufacturer. At full power, the light has a range of 100 meters (warm 99 m) according to the manufacturer. The lamp is completely shockproof and waterproof in accordance with enclosure class IP68.

Wizard C1 Pro Magnet USB is available with both cool and warm LED. The warm LED is slightly less powerful, but it reproduces the colors a little better than the cool one. Choose the appropriate option!

Content

• Armytek Wizard C1 Pro Magnet USB Headlamp
• Headband
• 18350 Li-Ion battery (900 mAh)
• Magnetic USB charger
• Belt clip
• Extra o-rings (2 pcs.)
• Manual

Technical specification

• Brand and model: Armytek Wizard C1 Pro Magnet USB
• Power source: 900 mAh 18350 Li-Ion battery (included)
• Manufacturer's reported luminous flux: 1000 lm / 930 lm (warm)
• Manufacturer's reported range: 100 m / 99 m (warm)
• Manufacturer's reported burning time (maximum power): 55 min (500 lm after 5 minutes)
• Manufacturer's reported burn time (minimum power): 60 days
• Lighting: Wide combination
• Operating modes: 11 pcs
• Dimensions: 73.6 x 33 mm
• Weight: 55g
• Protection class: IP68
• Shock resistance: 10m drop
• Warranty: 120 months

WARNING! The luminous flux of this headlamp is very high. Although the headlamp has active temperature monitoring that reduces the light flow if the fixture overheats, the light energy itself can heat a nearby material to very high temperatures. It is therefore important to follow the safety instructions below:

1. Do not leave the lamp on with an obstacle within 5 cm in front of the lens!
2. Unscrew the bottom piece (the "cork" on the bottom of the lamp) half a turn to break the circuit and prevent accidental switching on, e.g. in a pocket.
3. A strong and efficient lamp is absolutely no toy! Do not allow the lamp to be used by a child without strict supervision

Quick guide

Unscrew the end cap and insert the battery. Screw the end cap firmly. The lamp is switched on and off by pressing the button once. The luminous flux is changed by holding down the power switch while the lamp is on, so that the lamp switches through the power modes. When the desired mode is found, release the power switch. Maximum power can be accessed from any power mode by double-clicking the button. Charging takes place by connecting the charger to the USB port, and the other end is connected with a magnet to the back of the lamp. ATTENTION! The bottom piece must be unscrewed a little to start charging.