Flashlight Olight Seeker 3, 3500 lm

Contents (Standard Package)

• Olight Seeker 3
• Magnetic charging cable (Olight MCC3)
• 4000 mAh 21700 Li-ion battery
• Wrist strap
• Manual

Content (Premium Package)

• Olight Seeker 3 Standard Pack
• Lumonite Velcro fastener
• Lumonite Silicone grease, 10g
• USB mains adapter
• USB cig adapter

Technical specification

• Brand and model: Olight Seeker 3
• Battery: 4000 mAh, 3.6V 21700 Li-ion (included)
• Manufacturer's reported luminous flux: 3500 lm
• Manufacturer's reported range: 220 m
• Light image: Combination
• Power modes: 4 + 1 turbo mode + strobe
• Switch: Rubber, on the lamp body
• Charging: Magnetic charging via USB
• Charging time: 3.5 h
• Material: Aluminium
• Dimensions: 128 x 35 mm
• Weight: 184 g (with battery)
• Impact resistance: 1.5 meters
• Protection class: IPX8
• Warranty: 60 months
• Other: Button lock and indicator for battery charge
• Importer: Handshake

Battery life

• Turbo: 3500 lm -> 1200 lm -> 600 lm / 2.5 + 87 + 37 min
• High: 1200 lm -> 600 lm -> 300 lm / 96 + 37 + 9 min
• Medium: 300 lm / 9 h
• Low: 50 lm / 47 h
• Moon: 5 lm / 12 days

Olight Seeker 3 Quick Start Guide

Unscrew the cover and remove the protective plastic from the battery. Switch the lamp on and off with a short press of the switch. The last selected power mode (excl. turbo) is stored in the lamp's memory.

Switching power mode: When the lamp is on, press and hold the switch. The lamp switches through the power modes in the order "low-medium-high-low...". Release the switch when you have activated the desired power mode.

Turbo: Double tap the switch quickly. Switch to the other power modes by holding down the switch, or return to the last selected mode by double-pressing again.

Moonlight: Long press the switch while the lamp is off.

Button lock: When the light is off, hold down the switch for about 2 seconds, until the light comes on briefly and then goes off again. You turn off the button lock in the same way. You can also unscrew the bottom piece a little to avoid accidentally turning on the lamp.

Timer: The lamp is equipped with a timer, which automatically turns it off after either 3 or 9 minutes of use. When the light is on, double click and hold the switch on the second button until you get to the timer settings. 1 blink indicates the 3-minute timer is active, while 2 blinks indicate the 9-minute timer is active.

Charging: Charging starts when the USB connector is connected to the charging socket. The charger has an indicator where you can follow the charging status. The red light is on when charging is in progress, and the green light is on when the battery is fully charged.