Flashlight NITECORE EDC15 - 1200 lm / 111 mm / Rechargeable
A very compact EDC flashlight with powerful white light and separate UV light. Rated light output 1200 lm, range 208 m. Shock, water and dust resistant construction.
Product Faq
A very compact EDC flashlight with powerful white light and separate UV light. Rated light output 1200 lm, range 208 m. Shock, water and dust resistant construction.
The Nitecore EDC15 is literally a pocket-sized rechargeable flashlight that is equipped with both traditional white light and powerful UV light. The light is just over 1.5 cm thick and only 11 cm long, but it still produces an impressive 1200 lumens of maximum light output and a beam of light that can reach up to 208 meters. The beam, consisting of a long-range spot and evenly distributed diffuse light around it, is ideal for a variety of uses both at work and in leisure, whether it is lighting an electrical cabinet, a car chassis, a long maintenance corridor, a construction site, a jogging path, a warehouse, a shed, a tunnel or why not even part of a cave!
The lamp's UV light has a power of 1350 mw, making it ideal for checking money and documents, precise cleaning work and also for examining the skin and fur of pets, for example. In addition to its excellent lighting properties, the EDC15 is also shock, water and dust resistant, so it can be taken as a companion even in challenging environments. The integrated pocket clip in the lamp makes it easy to transport, and the lightweight body, weighing only 88 grams, adds practically no extra weight to the bottom of your pocket.
The lamp is powered by a built-in 1050 mAh li-ion battery, which can be charged using modern USB-C technology via a charging port integrated into the lamp body. The four-stage battery charge indicator shows the remaining charge both during use and charging, meaning the battery will never run out unexpectedly. The charging time from empty to full is only approx. 1.5 hours, meaning that when the battery runs out, the lamp is quickly ready for use again. Two-year (24 month) warranty!
Content
- Nitecore EDC15
- USB-C charging cable
- Wrist strap
- Instructions
Specifications
- Brand and model: Nitecore EDC15
- LED: NiteLab UHi 25
- Battery: Built-in li-ion, 1050 mAh
- Manufacturer's declared luminous efficacy: 1200 lm
- Manufacturer's stated range: 208 m
- Light sources: White light + UV light
- UV light: 1350 mW / 365-375 nm
- Operating modes:
- White light: 4 power modes + 1 strobe
- UV light: 3 power modes
- Charging: USB-C
- Charging time: approx. 1.5 h (5V / 2A)
- Material: Stainless steel with PVD coating
- Dimensions: 111 x 28 x 16 mm
- Weight: 85g
- IP rating: IPX7
- Impact resistance: 2 m
- Warranty: 12 months
Operating times (as stated by the manufacturer)
White light
- High: 1200 lm / 1 h 15 min / 208 m
- Mid: 400 lm / 1 h 30 min / 120 m
- Low: 50 lm / 11 h / 43 m
- Ultralow: 1 lm / 200 h / 6 m
- Strobe: 1200 lm / - / -
UV light
- 3: 1350mW / 2h
- 2: 650mW / 3h
- 1: 220mW / 11h
Quick Guide
On/Off: Turn on the light by sliding the slider towards the head of the light. Turn off by sliding the slider in the opposite direction.
Mode Selection: The lamp has two modes: white light and UV light . When the lamp is on, short press the M button to switch between white light and UV light.
White light: Adjust the brightness with the slider. The lamp has four brightness levels: very low (1 lm), low (50 lm), medium (400 lm) and high (1200 lm).
UV light: When the UV light is activated, the power can be adjusted in 3 steps using the slider: level 1 (220 mW), level 2 (650 mW) and level 3 (1350 mW).
Strobe: When the white light is on, press and hold the M button to activate the strobe flash. Tap the M button to return to the previously used mode.
Charging: Connect one end of the USB-C cable to the charging port on the lamp and the other end to a power outlet using the AC adapter. The lamp can be used normally while charging.
The lamp's four indicator lights indicate the battery level as follows:
- 4 steady lights: 76-100% battery remaining
- 3 steady lights: 51-75% battery remaining
- 2 steady lights: 26-50% battery remaining
- 1 steady light: 10-25% battery remaining
- 1 blinking light: less than 10% battery remaining (charge as soon as possible)
You can find the manufacturer's instructions here.



