Flashlight Ledlenser P6R Work - 850 lm / 16 cm / Rechargeable

The Ledlenser P6R Work is a compact and durable flashlight built for demanding industrial and field professionals, including electricians, mechanics, construction workers, and rescue personnel. The lamp's robust construction, impact-resistant rubber guards, and a housing that is resistant to common industrial chemicals such as oil, brake fluid, and solvents ensure a long service life even in harsh conditions. According to the manufacturer, the lamp produces 850 lumens of light output and a range of up to 230 meters, making it an excellent choice for daily use, even in dim and open environments. The lamp's CRI value of 90 and 4000 K color temperature provide natural and color-reproducing light, which is perfect for inspecting welds, electrical installations, or tasks that require careful color separation. Smart Light Technology allows you to control all functions with a single button, even when wearing gloves. The lamp has several useful additional functions, such as a flashing light, emergency light and standby light, and an and an additional white side light for close-range tasks adds practicality. adds practicality for close-up work. The included charging station is also suitable for vehicle use, making it easy to charge on the jobsite or on the go. Thanks to the IP68 protection rating, the lamp is completely dustproof and can withstand immersion in water, so it can also survive wet and dirty conditions.

The P6R Work is equipped with Ledlenser's Advanced Focus System, which allows you to easily adjust the light beam from a wide diffused light to a narrow, focused spot - perfect for illuminating large areas and working in detail. The flashlight is powered by a powerful and rechargeable 3000 mAh battery with a runtime of up to 45 hours at the lowest power level. Charging is quick and easy with a magnetic charging cable, which offers maximum flexibility even when on the go. The flashlight is both water and dust resistant with an IP68 protection rating. In addition, it can withstand drops of up to 3 meters and is equipped with an additional protective rubber cover to reduce the risk of shock and impact, making it perfect for demanding work environments where reliable equipment is required.

Delivery content

• Ledlenser P6R Work
• 3.7V Li-Ion 3000mAh battery
• USB adapter
• Magnetic USB-A charging cable
• Wrist strap
• Adjustable mounting clip
• Storage case

Specifications

• Brand and model: Ledlenser P6R Work
• Intended use: As a flashlight for various work tasks
• Battery: Li-Ion 3000 mAh 3.7 V
• Manufacturer's stated maximum light output: 850 lm
• Operating modes: 4 + 6 special functions
• Charging: Magnetic USB charging
• Charging time: Approximately 4 hours
• Color Rendering Index (CRI): 90
• Manufacturer's stated color temperature: 4000 K
• Weight: 187 g (incl. battery)
• Length: 132 mm
• IP rating: IP68
• Change: Advanced focus system
• Warranty: 24 months (after registration: 7 years)

Operating time (manufacturer's information)

• Boost: 850 lm / 230 m / -
• Power: 700 lm / 190 m / 2 h
• Average output: 300 lm / 120 m / 4 h
• Low power: 15 lm / 20 m / 60 h

Quick Guide

On/Off: Press the button once briefly to turn the light on. Press again to turn it off.

Changing light modes (high, medium, low): Within three seconds of the light turning on, press the switch briefly to change the light mode. If no button is pressed within three seconds, the light will turn off the next time the button is pressed. The light will remember the last used mode if the memory mode is active.

Boost mode: Double-click the power button when the light is on. Boost mode lasts for 10 seconds and then automatically returns to the previous mode.

Programming Light Modes (Smart Light Technology): Press and hold the power switch for 5 seconds when the light is on. The programming mode will be indicated by flashing. Press the switch briefly to cycle through the modes: Low → Medium → High → Dim → Flashing → Spot → Emergency → Strobe → White. Press the button for 2 seconds to save the desired mode. Repeat for multiple modes, up to 10. To end programming, press and hold the switch for 4 seconds. The programmed mode is activated by pressing the switch several times within 3 seconds of the light turning on. The light will then cycle through the selected light modes in the order you set.

Key lock: When the light is off, press and hold the power button for 5 seconds. The light will flash 4 times to indicate that the lock is activated.

Charging: Connect the magnetic USB charging cable to the lamp. The indicator light will show charging in the following order:

• During charging: indicator light red
• Fully charged: indicator light green.