Electric bike rear light LUPINE C14 - 45 lm
Rear light for electric bicycles, powered directly from the bike's own battery. The light has an integrated accelerometer that detects speed and temporarily increases light output during braking to signal other road users that the cyclist is slowing down. Light output 45 lm, 80 lm when braking. Available with 34.9, 35.6, 36.4 and 38.6 mm brackets.
Select option:
93,91 €
93,91 €
93,91 €
Product Faq
Rear light for electric bicycles, powered directly from the bike's own battery. The light has an integrated accelerometer that detects speed and temporarily increases light output during braking to signal other road users that the cyclist is slowing down. Light output 45 lm, 80 lm when braking. Available with 34.9, 35.6, 36.4 and 38.6 mm brackets.
Lupine C14 is a rear light that is permanently mounted on an electric bike, and is powered directly from the electric bike's own battery. The light is equipped with a smart acceleration sensor that automatically detects braking and temporarily increases the light output to signal other road users that the cyclist is braking. The light's attachment replaces the saddle clamp (7Nm), meaning the light is attached to the frame (not the seat tube). The light can also be attached to the seat tube if the lip is ground away. In this case, some kind of adapter (e.g. a thin rubber pad) is needed in between so that the light is tightened tightly to the seat tube, which is slightly thinner than the frame. The light has a wide 240-degree light beam, which also increases the cyclist's visibility to road users approaching from the side. The light's power switch is located under the light and is easy to operate even with gloves on. Maximum light output 45 lumens. Available for 34.9 mm, 35.6 mm, 36.4 mm and 38.6 mm tubes, choose the right one from the product options. The light is StVZO approved.
The C14 is directly compatible with Shimano electronics. It also works with Bosch, Brose and Yamaha electronics, in which case a separate adapter cable (not included) may be required if the cable is not already on the bike. Adapter cables can be found here: Lupine eBike rear light cable.
Delivery content
- Lupine C14 electric bike rear light
- 3 x cable clamp
- Instructions for use (EN)
Specifications 
- Product: Lupine C14
- Intended use: As a rear light for an electric bike
- Operating voltage: 6-12V
- Light output: 45 lm (brake light 80 lm)
- Suitable tube diameter: 34.9 mm / 36.4 mm / 38.6 mm / 35.6 mm
- Material: CNC machined 6061-T6 aluminum
- Cable length: 100 cm
- Power consumption: 0.8 W
- Lens: Polycarbonate
- Weight: 35 g
- IP rating: IP67
- Impact resistance: IK09
- Other: StVZO approved
- Operating temperature: -25°C - +55°C
- Warranty: 24 months


