Bike rear light Lupine C14 Mag - 45 lm / Rechargeable

The Lupine C14 Mag is an innovative rechargeable rear bike light that makes cycling in the dark safe and comfortable! The light offers a maximum light output of 45 lumens and up to 22 hours of continuous operation, in addition to which the automated brake light and built-in light sensor make use effortless. The wide 240° beam of light is clearly visible to those approaching from behind and from the sides, which makes cycling safe in urban and built-up environments as well as on roads and off-road. Unlike many other bike lights, the C14 Mag is made of CNC-machined hard-anodized aluminum and is waterproof according to the IPX6 rating and impact-resistant according to the IK09 rating, so this light will not give in to rain, sand, dust, shocks or other external stresses.

The sensor built into the lamp monitors the cyclist's speed and switches on a higher light output whenever braking. This means that road users behind immediately notice changes in the speed of the bike ahead and can react to them in good time. In addition to the smart brake light, the lamp also has a handy light sensor that automatically switches the light on when it gets dark, meaning you don't have to remember to switch the light on yourself mid-ride if it was still light when you set off. The light sensor can also be switched off if desired, in which case the light must always be switched on manually.

The C14 Mag is powered by a built-in battery that can be easily charged via the magnetic charging port using the included charging cable. Although the battery is built into the light, it can also be replaced if necessary, making the C14 Mag a truly long-lasting companion for all your adventures. The light comes with a saddle mount that conveniently attaches to the light with a magnet, so it's easy to grab the light whenever you park, either for storage or charging. Two-year (24 months) warranty!

Delivery content

• Lupine C14 Mag rear light
• Built-in 1.65 Ah li-po battery
• 1 x Magnetic charging cable with USB-A connector
• 1 x Magnetic saddle mount
• Installation tools
• Lupine stickers
• User manual and installation guide

Specifications

• Make and model: Lupine C14 Mag
• Intended use: As a bicycle rear light
• Battery: Built-in 4.4 Wh, 3.7V li-po battery
• Declared luminous efficacy: 45 lm
• Light opening angle: 240°
• Charging: Magnetic USB charging
• Charging time: approx. 3 h
• Operating time: max. 22 h
• Material: 6061-T6 aluminum
• Dimensions: 71 x 40 x 26 mm (Length x Width x Height)
• Weight: 87g
• IP rating: IPX6
• Impact resistance: IK09
• Operating temperature: -25°C - +70°C
• Warranty: 24 hours

Quick guide

On/Off: Turn on the light by double-clicking the power button. Turn off by holding the power button down for about 2 seconds.

Changing the light mode: When the lamp is on, press and hold the power button to cycle through the light modes as follows (the lamp confirms each mode with a short flash):

• 1 x flash: Double click to turn on/off
• 2 x flash: Light sensor on/off
• 3 x flash: Brake light on/off
• 4 x flash: Low (0.2W) power mode
• 5 x flashes: High (0.5W) power mode
• 6 x flashes Flashing mode
• 7 x flash: Pulsating light mode
• 8 x flash: Factory reset

Release the switch at the desired mode.

Charging: Remove the C14 Mag from the magnetic mount under the saddle. Connect one end of the included magnetic charging cable to the light and the other end to the USB-A charging port. The light will glow red when charging and turn green when the battery is full.

Battery indicator: The light shows the battery level with a colored and flashing light:

• Solid green: Battery charge 100-75%
• Flashing green: Battery charge 75-51%
• Solid red: Battery charge 50-25%
• Flashing red: Battery charge 25-0%

Light sensor/automatic mode: When the light sensor is activated, the light will turn on automatically when it gets dark. It will also turn off the light when the bike has been stationary for more than 30 minutes.

Brake light: When the brake light is activated, the light detects sudden braking and temporarily increases the brightness of the light.

You can find manufacturer's user manual by clicking here (opens in a new window).