Modernum High current relay DT contact, Accessory wiring

Smart cable set incl. relay used to drive heavy loads, e.g. a high-power auxiliary light ramp or a series of several auxiliary lights. This relay cable set is most easily connected to an existing relay cable set to a free DT connector where it receives its ignition signal. This wiring thus creates its own circuit and "builds out" the existing relay wiring harness, making it capable of handling very high currents.

Perfect cabling if you e.g. already have some extra lights mounted on the car and want to expand the cable set to also be able to drive a powerful LED light bar. The high-current relay is connected to the existing relay set, where a free DT contact is then required. If you already have an existing additional light connected to your relay set, a branch is required to get a DT socket free for the high-current relay. If there is none available , flexible DT connector splitters are available here .

Technical specification:

• Product: Accessory wiring Modernum High current relay DT connector
• Use: To drive high-power auxiliary lights and ramps
• Swedish made
• Very high quality
• Incl. fuse holder and fuse (30A / 360watt at 12V)
• Powerful relay that can handle a full 70A
• Cable length approx. 80-100 cm
• Please note that the wiring can handle most high-power ramps, even those marked with more than 360W, as the actual power consumption is usually many times lower than what the auxiliary lights are marked with.