Auxiliary light holder PURELUX WRC, 3 + 1 lights
A robust, thicker than normal (3 mm) extra light holder for three round extra lights with a maximum diameter of 240 mm and an extra light ramp. Compatible with EU plates. Excellent choice when maximum light is needed!
Product ratings
4.8
number of ratings 33- Tekee mitä pitää. Valmiiden reikien määrä tuotti pienen pettymyksen mutta telineen saa kyllä nuillakin riittävästi kiinni. Oletin telineen olevan eu k...Jani V 7.9.2026
0
0
- Funkar bra men men går inte att få dit låsningen till regplåten
Emil L 12.2.2026
0
3
Valostore: Hej Emil, och tack för ditt omdöme! Det är lätt a... - Passet heldt perfektJan S 23.12.2025
0
0
- Kolmelle 9110 valolle turhan tiukka, edes sentti tai kaksi leveämpi mahdollistaisi säätämisen ilman kikkailuja. Muuten tukeva ja toimivaOskari A 27.8.2025
0
0
- OkK S 14.1.2025
0
0
- Todella hyvä jämäkkä teline.Matias K 7.1.2025
0
0
- Kjøpte egentlig feil, men funka bra, skal bestille riktig holder til mine lamper over nyttårSven-erik B 23.12.2024
0
0
- Som forventet, stål bit formet som den skulle i det som virker solid utførelseBorgar T 18.12.2024
0
0
- Stabil konstruktionNils christian B 17.12.2024
0
0
Product Faq
A robust, thicker than normal (3 mm) extra light holder for three round extra lights with a maximum diameter of 240 mm and an extra light ramp. Compatible with EU plates. Excellent choice when maximum light is needed!
Purelux WRC is a series of additional light holders intended for mounting behind the number plate, which allows the installation of three round additional lights and an additional light ramp on the front bumper of the car. The upper edge of the auxiliary light holder has three separate brackets for the round auxiliary lights with a maximum diameter of 240 mm, while the lower edge has two brackets for mounting an auxiliary light ramp. The extra light holder is mounted discreetly behind the registration plate, so that the installation is neat and tidy and nothing extra is visible. The WRC light holder is 3mm thick, providing a robust and stable construction so the holder will not buckle or bend under the weight of larger auxiliary lights, as long as the bumper mount is properly tightened. Purelux WRC enables a unique and perfect mounting for installations where maximum light is required!
With its mounting holes of 10.5 x 25 mm, the additional lights can be installed and adjusted in depth to your liking. In addition, there are several mounting holes on the auxiliary light holder so that it can be easily mounted on the bumper. The distance between the mounting holes is 245 mm for the upper row and 350 mm for the lower row. The total width of the holder is 520 mm. The extra light holders in the WRC series are compatible with EU license plates.
Note! In the same series, there is also an extra light holder for mounting up to 4 round extra lights. You can find it here: Purelux WRC, 4 extra lights
Technical specification
- Make and model: Extra light holder Purelux WRC, 3 + 1 extra light
- Area of use: For the assembly and installation of additional lights for vehicles
- Compatible with EU registration plates
- Fits 3 round extra lights and 1 extra light ramp
- Max. diameter for round lights: 240 mm
- Measure:
- Width: 520 mm
- Height: 134 mm
- Dimensions of mounting holes:
- Distance between the lower holes: 350 mm
- Distance between the upper holes: 245 mm
- Thickness: 3 mm
- Weight: 1500 g
