Worklight Unilite SLR-1000, 1000 lm

THE PRODUCT HAS BEEN OUT OF STOCK - YOU FIND SIMILAR PRODUCTS HERE !

The Unilite SLR-1000 is a versatile, rechargeable and compact work light. The lamp has a powerful luminous flux of 1000 lm and a pleasant, wide light pattern. It is also equipped with "flashlight function", a 180° rotatable magnetic base and hanging hook. With the help of these, you can attach the lighting to metal surfaces, to hooks, to poles, etc. At the end, there is also an LED that provides 300 lm light flow, so you can use the lighting like a normal flashlight.

The lamp's power source is a 3.7 V, 5200 mAh Li-ion battery, which provides an operating time of up to 84 h. The battery is easily charged through the USB-C charging port. Time from empty to full battery is approx. 6.5 hours, and the indicator shows the current charging status. Four LED indicators light up when the lamp is turned on - these show the remaining battery capacity: 95-100% (4 LEDs), 65-95% (3 LEDs), 35-65% (2 LEDs), 15- 35% (1 LED) and below 15% (1 flashing LED).

Content

• Unilite SLR-1000 work light
• USB-C charging cable
• Manual

Technical specification

• Make and model: Unilite SLR-1000
• Area of use: Work lighting
• LED: 1 x COB LED / 1 x CREE LED
• Luminous flux (max): 1000 lm
• Range (max): 100 m
• Power source: Built-in 3.7V, 5200mAh Li-ion battery
• Charging time: approx. 6.5 hours
• Weight: 320 g
• Dimensions: 130 x 55 x 48 mm
• Switch position: On the side of the lamp
• Protection class: IPX5
• Warranty: 12 months

Burning time

• Flood High: 1000 lm / 4 h / 40 m
• Flood Mid: 450 lm / 7 h / 25 m
• Flood Low: 40 lm / 84 h / 7 m
• Torch High: 300 lm / 13 h / 100 m
• Torch Low: 80 lm / 48 h / 47 m

Quick guide

The lamp is easily controlled by the switch. You turn on the lamp with a push. When the lamp is used in Flood mode, you also change the power mode with a push. The power modes are activated in the following order: Flood High, Flood Mid, Flood Low. When using the lamp in Torch mode ("flashlight mode"), you change the power mode in the same way. They are activated in the order: Torch High, Torch Low. You switch between Torch and Flood modes by holding down the switch for a short time. When you use the lamp at the same power level for more than 3 seconds, pressing the switch turns the lamp off.