Work lighting Masterlux 840, for screwdrivers-battery, 2500 lm

Very efficient (2500 lm) work lighting that can be operated with the most common 18-21V screwdriver batteries. Directly compatible with batteries from Makita, DeWalt, Milwaukee, Bosch, Black & Decker and Stanley. In this way, you minimize the number of batteries you need to deal with, as the tools and lighting can be powered by the same power source. The light cone of the lighting is very wide, 120°, and completely even, which provides good lighting over the entire work area. The lighting is equipped with three different power modes (2500, 1600 and 1000 lm), which makes it easy to adjust the brightness as needed.

Note! Depending on the batch, the color of the frame around the lens may vary between black (as in the product image) and red!

The versatile mounts provide flexibility in mounting: the lighting can be mounted "as usual" on the table or floor, but thanks to the magnetic feet at the bottom, it can also be easily attached to metal surfaces. The lighting also has a reversible hook that can be used to hang the lamp in the desired location. The fixture itself is rotatable 180°. In addition, the lighting is equipped with a USB port, where you can easily charge the mobile phone or the headlamp if necessary.

ATTENTION! The light's adapters are compatible with most DeWalt, Milwaukee, Black & Decker, Stanley, PorterCable, Bosch and Makita batteries. However, some manufacturers have several battery series in their range, not all of which necessarily fit with this product. Check compatibility on the product image or order and try at home. If it turns out that it doesn't fit, you can return the product free of charge.

Content

• Lamp fixture
• 4 adapters for different batteries: Makita, Bosch, Milwaukee/DeWalt and Black & Decker/Stanley

Technical specification

• Make and model: Work light, Masterlux 840, for screwdriver battery
• Max. luminous flux (manufacturer's information): 2500 lm
• Power modes: 3 (2500/1600/1000 lm)
• Light color temperature: 5500 K
• Burning time (depending on battery capacity): 2-15 h
• USB output: 5V DC, 1A
• Power source: 18-21 V Bosch, Makita, Milwaukee, DeWalt, Stanley or Black & Decker battery (not included)
• Dimensions: 90 x 255 x 340 mm
• Protection class: IP54
• Dimensions: 252 x 232 x 84 mm
• Weight: approx. 1080 g
• Warranty: 12 months

Quick guide

Place the correct adapter on the back of the light, and screw it in with the Phillips screw provided. Connect the battery to the adapter. Turn on the lighting by pressing the switch once. Subsequent presses of the switch cycle through the power modes in the following order: Low, Medium, High. On the last press, the lighting is turned off.