Worklight Purelux Multi-Function - 13 cm / 24W / Flood

The Multi-Function 24W is Purelux's first LED work light equipped with a two-color parking light (red and white) and an orange flashing warning light. The lamp has a flat, wide and vertical (50°) light beam, which enables installation even low, e.g. on the bumper . Thanks to the two-colour parking light, the work lights can shine white when fitted to the front of the car and red when fitted to the rear. In addition, the lamp's orange warning light serves as attention lighting when working on a construction site or in traffic. The light is also approved as a reversing light and the wide light beam that shines close by is perfectly suited for this use. Thanks to its versatile functions, the Multi-Function is ideally suited for e.g. for construction vehicles, work machines and heavy equipment. The lamp's light source is 16 efficient Osram 1.5W LEDs, which according to the manufacturer provide a comfortable light flux of 2400 lumens and a range of 47 m @ 1 lux (measured by Valostore). The lamp's 4850 kelvin color temperature is pleasing to the eye and not only maximizes sharpness and accuracy but also provides excellent resolution, facilitating observation of terrain and obstacles.

The Multi-Function's frame is designed to withstand hard use and varying weather conditions, and it withstands shocks and vibrations perfectly. In addition, the lens is a virtually unbreakable polycarbonate lens, and the front part of the lamp is designed completely flat, which means that it does not have a frame that can collect snow and ice on the surface. In addition, the lamp is completely protected against water and dust according to protection class IP68. Two year (24 month) warranty!

The lamp can be attached to any surface with the included mounting foot and mounting bolt. The base allows the light to be tilted up to 35° from the mounting base. Thanks to the tilt, the light beam can be directed in the exact desired direction and thus, if necessary, the light can also be installed at a different height than where you want to direct the lighting. Therefore, the light is also well suited for large work machines. The connection of the lamp is facilitated by the DT-2 cable already connected to the lamp, as well as the finished plus cables that go out separately for the parking and warning lights.

Content

• Purelux Multi-Function 24W
• Mounting foot
• Fastening bolt
• Cable with Deutch DT-2 connector
• Connection and installation instructions (EN, FI, SE, NO)

Technical specification

• Brand and model: Work lighting Purelux Multi-Function, 24W, Flood
• Area of use: As work lighting and warning lights in cars/machines
• LED: 16 x 1.5W OSRAM
• Operating voltage: 9-30 V
• Valostore measured current consumption: 1.05A @ 24V
• Estimated power: 24W
• Manufacturer's reported power: 24 W
  
  • Measured by Valostore: 25.2 W
• Theoretical luminous flux: 2400 lm
  
  • Measured by Valostore: 852 lm
• Valostore measured range of : 47 m @ 1 lux, 93 m @ 0.25 lux
• Manufacturer reported color temperature: 4850 K
  
  • Measured by Valostore: 4955 K
• Mounting: Mounting foot
• Contact: Deutch DT-2
  
  • Parking lights and warning lights + cables separately
• Cable length: approx. 40 cm (includes DT cable)
• Dimensions: 125 x 120 x 47 mm (width x length x depth)
• Weight: 630 g
• Protection class: IP68
• Approvals: EMC: ECE: R10, R7, R23, R65
• Warranty: 24 months

Quick guide

Coupling

• DT2 connector: Work light / reverse light
• White: Parking light (White)
• Blue: Parking light (red)
• Yellow: Warning light (orange)