Warning light PURELUX Strobe HD-4 - 20 W / 12/24V / 96 mm
Attention-grabbing LED warning light for demanding use. 7 flash patterns, a steady Cruise mode and the ability to synchronize up to 8 lights ensure versatility for a wide range of applications. Compatible with both 12 V and 24 V systems.
Select option:
Product Faq
Attention-grabbing LED warning light for demanding use. 7 flash patterns, a steady Cruise mode and the ability to synchronize up to 8 lights ensure versatility for a wide range of applications. Compatible with both 12 V and 24 V systems.
Purelux Strobe HD-4 is a low-profile warning light with a durable, high-quality aluminium housing and ECE R65 Class 2 approval, designed especially for heavy-duty vehicles and machinery. This robust warning light can be installed on the rear, side or bumper of a vehicle, and its slim design allows it to blend seamlessly into the vehicle's structure. Although the light is discreet when switched off, it is hard to miss when activated: the amber LEDs flashing through the clear lens attract attention from a distance, even in bright daylight.
The light features seven different flash patterns and a steady-burning Cruise mode. The road-approved Strobe HD-4 also features separate day and night modes. In daytime mode, the warning light is bright enough to remain clearly visible even in daylight, while night mode reduces the brightness to prevent dazzling the driver or others in the surrounding area. Its stylish appearance, compact size and impact-, water- and dust-resistant construction make it suitable for a wide range of vehicles and applications. The light is protected against radio interference in accordance with CISPR 25 Class 5, the strictest classification of the standard.
Multiple lights can be connected and synchronised to operate together. This allows the warning lights on a large vehicle or machine to flash in the same pattern and at the same time. Up to eight lights can be synchronised to flash simultaneously or alternatively configured to flash in an alternating pattern, so that, for example, half of the lights flash at a different time from the other half. The alternating flash function can also be used with just two lights. Five-year (60-month) warranty!
Delivery contents
- Purelux Strobe HD-4
- Mounting screws
- Wiring and installation instructions (EN)
Technical specifications
- Brand and model: Purelux Strobe HD-4
- Intended use: Warning and safety light for road traffic and worksites
- Operating voltage: 10–30 V
- Theoretical power: 20 W
- Power measured by Valostore: 7 W @ 12 V
- Light colour: Amber
- Dimensions: 96 x 28 x 14 mm (Width x Height x Depth)
- Mounting hole spacing: 88 mm
- Weight: 85 g
- Cable length: 300 mm
- Material: Aluminium housing, polycarbonate lens
- IP rating: IP69K
- Operating temperature: -45 – +65 °C
- Approvals and certifications: ECE R65 Class 2, CE
- EMC: ECE R10, CISPR 25 Class 5
- Warranty: 60 months
- Importer: Handshake.fi
Installation guide
Wiring
- Red: Power (+)
- Black: Ground (-)
- White: Cruise mode (+)
- Yellow: Synchronization, flash pattern selection
- Synchronization: Select the same operating mode for the lights to be synchronized, then connect their yellow wires together. This allows the warning lights to flash in sync and change operating modes simultaneously when the mode of one light is changed.
- Changing the flash pattern: Briefly connect the yellow wire to power (+) to cycle through the available flash patterns. Keep the wire connected to power (+) for 5 seconds to reset all interconnected warning lights to flash pattern 1.
- Green: Asynchronous flashing (+)
- Alternating flash: Connect the wire to power (+) to configure the warning light to flash alternately (out of phase) with other synchronized warning lights.
