Warning light Purelux Flash S - 17W / 12/24V

Purelux Flash S is a powerful, low-profile warning light with magnetic attachment, primarily developed for demanding professional use. The Flash S model is an excellent alternative for e.g. service vehicles, where the warning light does not need to be used continuously and can advantageously be switched off when not in use. The warning light can be stored in the car to always be easily accessible, and can be easily attached to the roof when needed. The main function of the warning light is to alert those moving around the site to ensure the safety of both workers and others moving around the area. Purelux Flash S is equipped with 10 different power modes and powerful light that ensures that the vehicle is clearly visible to all passers-by.

The warning light's aluminum frame is vibration and corrosion protected, and also water and dustproof according to IP67 classification. The operating voltage of 10-30V makes it possible to use the same warning light on cars and vans as well as on heavier vehicles (e.g. trucks, tractors, work machines, etc.). 360° light angle!

The Flash S is E-marked and approved for road use, and its ECE R65 Class 1 classification means that it is also approved for night use. When used at night, the warning light does not risk dazzling drivers, passers-by or other workers around the workplace.

The modern and compact design means that the warning light fits well on any vehicle, regardless of whether it is factory new or a few years old. The magnetic attachment is intended for occasions where a permanent installation is not desirable or possible.

ATTENTION! Purelux Flash S is ECE R65 Class 1 approved, which means it can be used in European traffic! Class 1 means that the luminous flux is sufficient for night use, but not sufficient for use in daylight.

Also available in larger models: Purelux Flash M and Purelux Flash L.

Content

• Warning light / flashing light Purelux Flash S
• Magnetic foot
• Power cord with cigarette adapter, 2500 mm

Technical specification

• Brand and model: Purelux Flash S
• Area of use: Warning light / flashing light
• Operating voltage: 10-30 V
• Power consumption: max. 17 W
• E-label: ECE R65 Class 1
• ECE R10, CISPR 25 Class 3, SAE J845 Class 1
• Protection class: IP67
• 10 different power modes
• Orange light
• Dimensions: 110 x 51 mm (W x H)
• Warranty: 24 months

Power modes

• Simple flashing ( Night mode )
• Double flashing
• Triple flashing
• Quadruple flashing
• Five times flashing
• Rotating flashing
• Combo, single/triple flash
• Combo, single/multiple flashes
• Strobe / 600 FPM
• Even light (cruise)

Connection manual