Switch PURELUX On/Off/On HD Switch

The Purelux Rocker Switch is a practical on/off switch to control, for example , extra light and work lighting. Using the switch, the additional lights can be installed either to operate only through the switch, when the switch is connected to the power or ground wire. In addition, the switch can be connected to the relay harness in such a way that the auxiliary lights can be turned off, even if the main ones are still on.

If the switch is installed in conjunction with a relay harness, and you want to use it to shut off power to additional lights and keep the car's own lights on, you should install the switch at the relay harness' control power wire. In this way, the additional lights can be turned off from the switch even if the own high beams are still in use (eg when meeting an oncoming vehicle, the additional lights can be turned off first, and only a little later the car's own high beams). With this connection, however, the additional lights will not come on if the car's high beams are not on, that is, they work at the same time as the car's own high beams.

Thanks to the on/off/on function, the switch enables the control of, for example, two different additional lights through the same switch. When current is applied to the center pin, the switch does not allow current to pass in the center position. On either side, the switch allows current to pass to the pin on the opposite side. In this way, the various additional lights can be switched on at different times, so that the lighting can be controlled as needed.

Technical specification

• Make and model: Switch Purelux On/Off/On HD Switch
• Area of use: Control additional lighting and work lighting
• Current capacity: 25A
• Includes screw-on protective rubber