Rechargeable worklight NIGHTSEARCHER HazStar, 2000 lm
Work lighting of 2000 lm combined with red warning light for e.g. vehicle. The warning lights (3 pcs) can be detached from the lamp. Up to 6 hours burning time at full power!!
Product Faq
Work lighting of 2000 lm combined with red warning light for e.g. vehicle. The warning lights (3 pcs) can be detached from the lamp. Up to 6 hours burning time at full power!!
The NightSearcher HazStar is a work lamp combined with a warning light, where the work lighting has an impressive luminous flux of 2000 lm. HazStar has been developed especially for the needs of motorists: the work lighting enables e.g. tire change and minor repairs, and if the accident is imminent, the driver can place the light that forms a red glowing warning triangle behind the vehicle to warn other motorists of a broken down vehicle. The warning lights are also removable and can be attached with a magnet, for example to the side of the vehicle to draw attention to the surroundings. Even when the warning lights are used separately, they have a burning time of up to 9 hours.
HazStar has a wide range of uses whose efficient work lighting can be used both for vehicle use and as a full-fledged work light on construction sites. The lamp has a wide light pattern with abundant scattered light that facilitates one's work, and at full power the lamp has a burning time of up to 6 hours! In addition to its function as a work light and warning light, the HazStar is equipped with a USB port on the back, so the light can be used as a PowerBank to charge other electronic devices. Even the lamp itself is charged via a USB port, which means that HazStar can be charged with normal mains power, or for example in a vehicle from the cigarette socket. Battery status is easily monitored with the battery indicator at the lamp's power switch.
Content
- Nightsearcher HazStar
- USB charging cable
- Instructions for use
Technical specification 
- Brand and model: Rechargeable work light Nightsearcher HazStar, 2000 lm
- Purpose: As work lights in vehicles and on construction sites, as warning lights
- Power source: Built-in Li-Ion battery
- Manufacturer's reported luminous flux: 2000 lm
- Manufacturer's reported range: 25 m
- Operating time: 6 hours as work light, 9 hours as warning light
- Operating modes: 4
- Size: 255 x 90 x 340 mm
- Weight: 965 g
- Protection class: IP65
- Other: Two lights in one, work lighting and 3 detachable red warning lights
- Warranty: 36 months
Operating modes
- High (work lighting)
- Low (work lighting)
- Red flash (warning lights)
- Red flash + work lighting (High)
Quick guide
Charge the HazStar by connecting one end of the included USB cable to a power source and the other end to the charging port on the back of the light. The three battery indicators next to the port tell you the charging status, the indicator light above them shows if the light is still charging (red) or if it is full (green). There is also a USB output under the charging port, through which you can charge, for example, a mobile phone.
Turn on the HazStar by pressing the power button once. The lamp lights up in high power mode. With the following pressure, the lamp goes through the power modes in the order: High -> Low -> Red flash -> Red flash + work lighting. After the last power mode, the lamp turns off.
If desired, the three red warning lights on the rear can be removed by lifting them out of their respective slots. The warning lights are attached with a magnet to, for example, the sheet metal surface of the car and each of the three warning lights can be operated separately with its own switch located on the back of the lamp.
