Rechargeable worklight NightSearcher Tri-Spector, 600 lm

The Nightsearcher Tri-Spector is a rechargeable work light with a replaceable lamp head. The three different lamp heads make it easy to adapt the lighting to different areas of use. The magnet at the bottom makes it easy to attach the lamp to metal surfaces, while the hook at the bottom can be used to hang the lamp. The built-in battery is easily charged through the USB cable. The luminous flux and power modes depend on which lamp head you use. Tri-Spector is splash- and dust-proof according to IP44 classification.

The Flood lamp head provides a very wide light pattern that is well suited for general lighting at work. Two light fluxes, 600 or 300 lm. In addition, there is a 100 lm spot at the end. The narrow design makes it possible to illuminate narrow spaces, e.g. the car's engine compartment, no problem. The burning times are as follows:

• 600 lm / 2 h
• 300 lm / 3.5 h
• 100 lm / 10 h

The lamp head with adjustable light pattern offers two power modes: 300 and 100 lm. The width of the light cone can be adjusted steplessly from a very narrow spot to wide light. Excellent as an examination light on e.g. a workshop, or as a normal flashlight at work. The burning times are as follows:

• 300 lm / 3.5 h
• 100 lm / 6.5 h

The lamp head with bendable shaft is optimal for lighting extremely narrow spaces. The 30 cm long bendable shaft makes it possible to illuminate surfaces where larger lamps have no way of reaching. 80 lm luminous flux and burning time as follows:

• 80 lm / 10 h

Content

• NightSearcher Tri-Spector Battery Grip
• 3 separate lamp heads
• Micro-USB charging cable
• Mains adapter

Technical specification

• Product: Rechargeable work lamp NightSearcher Tri-Spector
• Luminous flux (max): 600 lm
• Protection class: IP44
• Three separate lamp heads
• Built-in li-ion battery, 3.7 V / 2600 mAh
• Charging time: 4 h
• Burning time: up to 10 h (at the lowest power setting)
• Outer dimensions: 423 x 66 x 45 mm
• Weight: 290 g
• Warranty: 24 months

Quick guide

Choose the lamp head according to the area of use. Insert the pins in the lamp head into the grooves on the battery grip, push the lamp head all the way in and screw it in place.

Turn on the lamp by pressing the switch. If the selected lamp head offers several different power modes, switch between them by pressing the switch again. When the lamp has switched between all power modes, it switches off. The battery indicator shows when switched on how much battery is left, through 1-3 green LEDs. A red LED means the battery is empty.

CHARGING: Connect the AC adapter to the wall outlet and the USB cable to it. Connect the other end of the USB cable to the charging port on the lamp's battery grip. The battery indicator shows when charging is complete: 3 green LEDs flash during charging and glow continuously when the battery is full.