Rechargeable LED light puck Pureflare, 16 LEDs, Blue

PERFECT TO HAVE LYING IN THE CAR - WARNING LIGHTS IF YOU'RE STANDING IN TRAFFIC!

The new LED light puck is unbeatable as an observation or warning light! Rechargeable and with magnet. Available in several different colors; orange, blue, green, yellow, red and white. This puck emits blue light, you can find the other color options here.

The LED light puck can be set to shine with a steady light or to flash in several different ways. As a power source, there is a built-in lithium ion rechargeable battery that lasts up to several days at a time. The light puck is very easy to charge, either via USB or with Pureflare's mains and car adapter. The light puck is designed to withstand rough handling, shocks, dust and water. Warranty 24 months!

The light puck has magnets at the bottom and can be attached to metal surfaces.

The light puck can be used as a safety light for traffic management, observation light on vehicles or in other ways in situations where you have to call the attention of road users. In addition to road construction, traffic management, police matters and other similar needs, it is also perfect for associations or private use where observation or warning lights are needed.

LED light puck operating hours

• Rotating light 9 h
• Short strobe sequences 9 h
• Flash 60 h
• Every second blink 9 h
• SOS signal 14 h
• Continuous (high) 5 h
• Continuous (low) 35 h
• Spotlight (2 led) 9 h
• Spotlight (4 led) 6 h

Technical specification

• Li-ion 3.7V 700mAh, built-in battery
• Dimensions 106 x 34 mm, weight 198 grams
• Charges through USB port. Mains and car chargers are available as options.
• Charging time 2 - 3 hours
• Warranty 24 months
• Importer: handshakesweden.se

Instructions for use

The LED light puck is turned on by pressing the power button on the top. Light effect is selected by pressing the power button repeatedly until the desired light effect is obtained. The LED light puck is turned off by pressing the power button for 5 seconds.

The LED light puck is charged with a USB cable (included). Connect the USB cable to the charging module. The charging module is magnetically attached to the LED light puck so that the plus pole (+) lies against the plus pole (+) of the light puck, and the minus poles against each other. The LED in the charger changes color to orange when charging begins. When charging is complete, the LED lights up green. Charging can be interrupted at any time.

Accessories

ATTENTION! The Pureflare LED puck is charged via the USB port. If you want to charge it from a 230V socket or from the car's 12V socket, look at these USB adapters and the charging case: