Mosquito repellent Nitecore EMR20

The Nitecore EMR20 is a modern, high-performance mosquito repellent that repels annoying bloodsuckers in a radius of almost 5 meters in just 10 minutes. Unlike many other repellers, the EMR20 is not powered by butane gas but by a battery that effectively heats the mosquito mat inside the device, vaporizing and dispersing agents into the air to keep the mosquito swarms away. The lightweight repellent that can be used with one hand is easy to take on camping trips, hiking or fishing trips and also provides a mosquito-free evening on the patio in the garden. A practical pocket clip allows the device to be attached to, for example, a backpack, and the included protective cover prevents nearby materials from getting too hot.

The Nitcore EMR20's high-performance batteries provide up to 12 hours of run time at a time and are easily charged with the included USB-C charging cable in just 2.5 hours, after which the device is ready to use again. In addition to normal use during charging, the expeller can also be used as a backup power source (power bank) if needed, so you can use it to charge your phone, for example. The EMR20 is IPX5 rated to protect against water splashes from all directions, so you don't need to protect it in case of a rainy weather. The mosquito repellent can be used with the most common mosquito mats on the market (not included) .

Content

• Nitecore EMR20 Mosquito Repellent
• USB-C charging cable
• Protective cover
• Instructions for use

Technical specification

• Brand and model: Mosquito repellent Nitecore EMR20
• Area of use: To repel mosquitoes
• Power supply: 2 X 21700, 10000 mAh Li-ion batteries.
• Operating time: approx. 12 hours.
• Charging: USB-C
• Charging time: approx. 2.5 hours.
• Operating time (on a single charge): approx. 12 hours.
• Range: approx. 5 m
• Dimensions: 135 x 48.8 x 31 mm (length x width x depth)
• Dimensions of suitable mosquito mat: 34 x 48 mm
• Weight: 227 g
• Shock resistance: 1 m
• Protection class: IPX5
• Other: Works with the most common expulsion mats on the market (not included).

Quick guide

Before use: When the device is turned off, insert a mosquito mat by sliding it in from the side.

On/off: Turn on the device by pressing and holding the power button for about 2 seconds, when all the indicator lights light up one by one, the battery will start heating the mosquito pad. Turn off the device by pressing and holding the power button for about 2 seconds, then all the indicator lights will turn off one by one, the device will turn off.

Adjustment of operating mode: The outdoor mode is activated automatically at start-up. When the device is on, press the power button once to change the mode. When the switch is blue, outdoor mode is active and when the switch is green, indoor mode is active.

Battery indicator lights: Press the power switch once and the indicator lights will light up to indicate the battery charge as follows:

• 4 lights: Battery level approx. 100%.
• 3 lights: Battery level approx. 75%.
• 2 lights: Battery level approx. 50%.
• 1 light: Battery level approx. 25%.
• 1 flashing light: Battery is almost empty, charge as soon as possible.

After use: Allow the device to cool thoroughly after use before storing. Remove the used mosquito mat and dispose of it properly, do not leave the pad in the wild, out of reach of children or pets.

Charging: Insert one end of the included USB-C charging cable into the USB-C port on the bottom of the device and the other end into, for example, a computer or a power adapter. The battery indicator lights show the charge status. The device can also be used normally while charging.

Note! Do not cover the device during use and do not place flammable materials such as cloth or plastic on top of it!