Light set for ATV Purelux ATV Valodition

Purelux ATV Valodition is a comprehensive light package for ATVs designed and assembled by Valostore together with the PariUraa ATV blog and Hyvinkää konetalo. In addition to the work and additional lights, it is possible to choose small but bright warning lights for the set, which can be used to improve the visibility of the ATV significantly, e.g. when operating in work use. The total light output of the set is an impressive 15,800 lm, which ensures at least sufficient lighting in all directions. The set includes a small, but very high-performance Purelux Panther Aero S300 additional light panel for road traffic and situations where a long range ahead is needed for lighting. In addition, the set comes with two efficient, wide-beam work lights to be installed in the front bumper, which can illuminate the vicinity of the ATV with a 180° width right from the bow. In the back, the set includes both wide and narrow-beam lamps, which can be used to illuminate the rear side from near to far . It also comes with a very versatile eight-button switch panel that can control all the lights! This makes wiring easier and makes installation smoother!

Thanks to its slender frame and dark profile, the low-frame Aero S300 additional light can be installed very neatly on the front of the ATV. The slender frame enables installation even on the underside of the load rack, behind the bumper line, so the light is protected from impacts and scratches from twigs. The Panther's beam is limited in the foreground, which ensures maximum visibility far ahead, and not too much light accumulates in the foreground. In addition, the light has a stylish parking light that can be lit either in white or orange. If desired, the orange parking light can even be used as a single warning light, when the connection is handled with the switch panel included in the set and the parking light switch is selected to light as a flashing light.

The very wide beam of the compact, dark-looking Pureux Black Square 40 lights can be used to complement the lighting of the additional light panel and the ATV's own lights in the areas near the front edge of the ATV. The additional light panel, combined with the ATV's own lights, is usually enough to illuminate further ahead brightly enough, so that the work lights can be directed more to the sides, to illuminate the front area a little to the side as well. Alternatively, they can also be installed, e.g., on the front edges of the rear cargo rack and directed forward from there, so that they illuminate the sides of the ATV, the edges of the road and ditches. The lights should be placed on the back side of the bumper line, so they are protected from impacts.

The very low Terrain Black Slim work lights can be placed in the rear bumper of the ATV, again inside the bumper line, from which the second, wide-beam light illuminates the rear part with an almost 180° scope, while the narrow-beam light further back. Thanks to its small size, the lights can be installed in a shelter, so that scratches from branches and other impacts do not hit the lights.

The set also comes with an eight-seater Purelux Multi-Switch Panel, which can be used to control all lights and, if desired, other devices. From the switch panel, all the lights connected behind it can be made to light either steadily, momentarily (by pressing the button at the bottom) or flashing. In this way, a separate blinker relay is not needed to make the lights blink, but, for example, the parking light of the additional light can be made to blink and act as a single warning light.

In addition to the set, it is possible to choose small (36 mm), but very bright warning lights, which can be installed, for example, on fenders (inside or outside) and covers, e.g. next to the headlights. With eight blinkers, visibility in all directions is guaranteed, and the machine will certainly not go unnoticed.

Delivery contents (Light set without warning lights)

• Work light Purelux Black Square 40 Flood, 40W , 2 pcs
• Work light Purelux Terrain Black Slim Flood, 30W , 1 pc
• Work light Purelux Terrain Black Slim Spot, 30W , 1 pc
• Auxiliary light Purelux Panther Aero S300
• Switch panel Purelux Multi-Switch Panel

Delivery contents (Light set with warning lights)

• Work light Purelux Black Square 40 Flood, 40W , 2 pcs
• Work light Purelux Terrain Black Slim Flood, 30W , 1 pc
• Work light Purelux Terrain Black Slim Spot, 30W , 1 pc
• Auxiliary light Purelux Panther Aero S300
• Switch panel Purelux Multi-Switch Panel
• Warning light Purelux Strobe, round, 36 mm , 8 pcs

Purelux Panther Aero S300

The Purelux Panther Aero S300 is a very compact and aerodynamically shaped additional light panel, which, in addition to a modern appearance, combines both a great size-power ratio and top features that improve the driving experience! The low-profile Panther Aero S300, finished with dark optics and a frameless lens, is also equipped with e.g. with a two-color parking light, year-round conditions with a durable structure and two different power modes. The light can be selected for use in either the limited power mode approved for road traffic or the Purelux PowerBoost® mode that releases full power, where the lamp offers a measured light output of up to 3930 lumens and a measured range of 352 meters @ 1 lux! Just to make a little light, the Purelux Panther Aero S300 is therefore quite capable, and due to its size, it is possible to install it discreetly on the front of practically any ATV.

The spotlight of the Panther Aero S300 not only illuminates far straight ahead, but the light pattern also opens up brightly to benches and the edges of the road. In addition, the light pattern is softly limited in the height direction, so that the light is directed exactly where it is most needed. Panther's high-quality light pattern significantly increases driving safety, because you get more reaction time as a driver, e.g. in case of forest animals running across the road or obstacles looming ahead.

Technical information

• Measured light output: 3930 lm (Purelux PowerBoost®)
• Measured range: 325 m @ 1 lux (Purelux PowerBoost®)
• Measured power: 54 W @ 12V (Purelux PowerBoost®)
• Weight: 900 g
• Dimensions: 296 x 42 x 62.5 mm (Width/Height/Depth)

Purelux Terrain Black Slim

Purelux Terrain Black Slim Flood 30W is a top-class LED work light designed for challenging conditions. The model with a wide light beam is at its best in situations where you want to illuminate the surrounding areas of the game as widely and evenly as possible, and a narrow one when the light is needed further away. Despite its small size, the wide-beam Terrain Black Slim Flood offers 2330 lm light output and a wide-illuminated range of 73 m (@ 1lux) and the narrow-beam offers 3920 lm output and a range of 310 m (1 lux). Due to its slender and particularly low (only 44 mm high) frame, the Terrain Black Slim works great in ATVs, as it can be installed as an inconspicuous and stylish part of the ATV instead of the light looking disproportionately large. In addition, the light's dark reflector optics ensure that the lamp fits practically any ATV in terms of its appearance. The top-quality, shock- and weather-resistant aluminum frame combined with a practically unbreakable polycarbonate lens ensure that the lamp, despite its small size, is at home even in heavy use.

Technical information

• Measured light output: 2330 lm (wide), 3920 lm (narrow)
• Measured range: 64 m @ 1 lux (wide), 310 m (narrow)
• Measured power: 31.3 W
• Weight: 492 g
• Dimensions: 157 x 44 x 60 mm (Width/Height/Depth)

Purelux Black Square 40

Purelux Black Square Flood 40W is a high-end, compact, but powerful LED work light designed for challenging conditions. The model with a wide light beam is best suited for locations where you want to illuminate the surrounding areas of a work machine or, for example, an ATV as widely and evenly as possible. Despite its small size, the Black Square Flood offers an impressive 2811 lm (measured) light output and a 53 m range (@ 1lux), which are the absolute top of its class. Due to its small size (only 81 x 75 mm), Black Square works great even in tight installation places, and the modern, dark reflector optics ensure that the lamp fits even the most modern vehicles in terms of its appearance. The top-quality, shock- and weather-resistant aluminum frame combined with a practically unbreakable polycarbonate lens ensure that the lamp, despite its small size, is at home even during heavy work use.

Technical information

• Measured light output: 2811 lm
• Measured range: 53 m @ 1 lux
• Measured power: 43 W
• Weight: 431 g
• Dimensions: 81 x 75 x 68 mm (Width/Height/Depth)

Purelux Strobe Round, 36 mm

Purelux Strobe Round is a stylish surface-mounted warning light / level indicator, designed especially for "inconspicuous" installations. In recessed installation, the body of the lamp is sunk into the opening, leaving only the front of the lamp and the lens visible. Strobe Round can be installed either in a slot already found in the vehicle, or it can be made its own place, for example in the bumper, rear or side of the vehicle. Thanks to its small size (diameter only 36 mm), Strobe Round fits neatly and unobtrusively into vehicle structures, but when the lights are switched on, no one will notice it. The warning light is equipped with four orange 3W LEDs, and it has 12 different operating modes. If desired, several lights can be connected to work together, in which case the lights are synchronized with each other. In this way, the warning lights of the entire vehicle can be made to flash in the same operating mode at the same time, so that the lighting is uniform.

Technical information

• Power: 8W
• Size: 36 x 40 mm (width x length)
• Operating modes: 12
• Light color: orange
• Weight: 55 g