LED strip control set AGGE Dimming 4-button, RF 2.4 GHz

AGGE Dimming 4-button is a ready-made set for single-color LED strips, which includes both a control unit and a remote control. The control unit is installed between the transformer and the LED strip using ready-made connectors, after which it can be paired with the included remote control using the 2.4 GHz radio frequency they use.   The remote control has an On/Off button for the light strip, buttons that allow 10-step adjustment of the light output, and a button that allows quick switching between 10% and 100% light output. The remote control included with the set can also be connected to other control units operating at the same frequency , which makes it possible to operate all the LED strips in the home with the same remote control. In an unobstructed area, the operating range of the remote control is approx. 30 meters, which means it allows remote control of the light strip even from the other side of the room. A max. 5A load can be connected behind the control unit.

In addition to the control unit and remote control, the package includes a round bracket designed for the remote control, which can be attached to any metal surface (e.g. a refrigerator door) using the magnet on the back. The bracket can also be drilled or taped to any flat surface using the included mounting screws or adhesive sticker, meaning the controller can be placed in the location that best suits you. The remote control is attached to the bracket with a magnet, so it can be easily removed from the bracket for use or battery replacement, and then returned to its place, so it is always safe. The remote control operates on one CR2032 battery (included), which provides the remote control with an operating time of up to approx. 2 years at a time, meaning you don't have to constantly change the battery. The remote control is intended for dry indoor use (IP20). Two-year (24 month) warranty!

Delivery content

• AGGE Dimming 4-button remote control
• AGGE Led Dimmer Control Unit
• 1 x CR2032 battery
• Wall mount
• Mounting screws for wall mount
• Mounting sticker for wall mount
• Instructions for use (FI/EN/SE/NO/DK)

Specifications

• Product: AGGE Dimming 4-button
• Purpose: Remote control of LED strip
• Compatible with single-color light strips
• Both the remote control and the control unit operate on a 2.4 GHz radio frequency
• Control unit operating voltage: 12-24V
• Control unit current rating: 5A (60W / 12V, 120W / 24V)
• Remote control battery: 1 x CR2032 (incl.)
• Battery life: approx. 24 months
• Operating range of the remote control and control unit: approx. 30 m
• Remote control dimensions: 75 x 18 mm (Diameter x Depth)
  • Mounting hole spacing: 30 mm
• IP rating: IP20
• Other: The package includes a wall mount, mounting screws and adhesive mount.
• Operating temperature: -30°C - +55°C
• Electrical number: 2619808
• SKU: 20080
• Warranty: 24 months

Quick Guide

Connect the control unit between the light strip and the transformer using the pre-made connectors, after which you can pair the remote control and the control unit using the instructions below.

To use the remote control: Open the battery compartment of the remote control and remove the insulating plastic between the battery and the remote control.

Pairing the remote control and the control unit: Press the Match button on the receiver/control unit briefly and immediately press the On/Off button on the remote control. The indicator light on the receiver will flash a few times to indicate successful pairing.

Unpairing: Press and hold the Match button on the receiver for about 5 seconds, the receiver's indicator light will flash a few times to indicate that the pairing has been unpaired.

Using the remote control:

• On/Off: Press the power button on the top of the remote control once to turn the LED strip on or off.
• Light intensity adjustment: The light intensity can be adjusted in 10 steps using the arrow buttons on the right and left sides of the remote control. Quickly switch between 10% and 100% light intensity by pressing the button on the bottom of the remote control.

Note: An unlimited number of control units can be connected to one remote control, and 10 remote controls can be connected to one control unit.