LED strip package PureStrip - RGB / 12V / 500 cm

An easy-to-use PureStrip RGB LED strip set, which can be used to create modern and stylish lighting in all dry interiors of the home. This complete set includes everything you need for installation! The package includes five meters of colorful RGB LED strip, the brightness and color of which can be easily adjusted using the included remote control or a mobile app installed on the phone. The LED strip also has several different operating modes, so you can vary between smooth, continuous light flows and several different ready-made operating modes with flashing and color-changing lights. Thanks to its versatile functions, the strip can create completely unique lighting effects, so it works not only as general lighting but also as mood lighting. In this way, you do not need several different light sources for different purposes, but everything is managed with the same LED strip! This ready-to-use RGB strip can be used, for example, as a mood light in the living room , as a lamp for the headboard or under the bed in the bedroom, or as background light for the children's room furniture, in which case it also works as a good night light. Only your imagination sets limits when choosing areas of use!

In addition to the strip, the package also includes brackets for a neat installation of the LED strip, a control unit for the lighting, an outlet transformer and a remote control for controlling the strip's functions. Two separate strips can be attached to the included controller, so the strips can be branched in different directions, but the connection is still behind the same tap transformer. So by using a transformer, a larger area can be lit and there is still room for other electrical appliances. With the help of PureStrip LED strips, it is also easier to create lighting that suits your needs. The LED strip works completely Plug&Play, so installation is simple and fast. If necessary, the strip can be shortened at the marked points. The LED strip has real RGB LEDs, which means that each LED has all the colors. Power 4W / 1 m.

The back of the PureStrip RGB strip has an adhesive surface, with the help of which it can be easily attached to any clean and flat surface. With the included brackets, the strip can also be supported if necessary. The LED strip has enclosure class IP20, so it can be used in all dry interiors. The included remote control has a range of up to 15 meters, so you can install the LED strip practically anywhere in the home, and still control it, for example, from the sofa in the living room! The remote control works with a CR2032 battery (included). Alternatively, the LED strip can also be operated via the ZENGGE mobile app via Bluetooth, so e.g. the color of the light can be adjusted steplessly. The app can be downloaded from the Google Play Store or the App Store. One year (12 months) warranty!

Note! Be sure to roll out the entire strip before turning on the power to avoid overheating!

Content

• PureStrip RGB LED strip, 5 m
• Outlet transformer
• Control unit with IR receiver
• 4-pin connector
• Remote control + battery (CR2032)
• Fasteners, 5 pcs
• Instructions for use and installation (EN)

Technical specification

• Brand and model: LED strip package PureStrip - RGB / 12V / 500 cm
• Area of use: Lighting of dry interiors
• Operating voltage: 12V
• Power: 20W
• Light color: RGB (Red / Green / Blue)
• Operating modes: 8
• Dimensions: 5000 x 10 mm (Length x Width)
• Protection class: IP20
• Remote control + CR2032 battery
• Remote control range: 15 m
• Everything needed for installation is included
• Can be plugged directly into a socket
• Warranty: 12 months

Quick guide

Mount the LED strip where you want it. Connect the strip to the control unit and the control unit to the tap transformer. Be sure to straighten the entire strip before connecting it to avoid overheating! Remove the colored protective plastic from the battery compartment of the remote control before use, and control the functions of the LED strip with the included remote control.

Note! The control of the green and blue light has slipped into the remote in the wrong direction, but this does not hinder use in any way.

If you want to control the LED strip not only with the remote control but also with a smartphone, scan the QR code on the side of the controller and download the ZENGGE app used for control through it. After installing the app, turn on your phone's Bluetooth. Pair the LED strip with your phone by tapping the plus sign (+) at the top left of the app. Then the LED strip is automatically connected to the app, and appears on the front of the app. After connection, you can adjust the LED strip's various functions via the app.