Led bar Strands Skylord 20" - Straight / 51 cm / 170W / Ref. 2x20

Strands Skylord 20" is a powerful auxiliary light panel designed specifically for the needs of professional drivers. The lamp is equipped with two different power modes: a moderate E-mode and an unlimited Xperience mode, the first of which can be used normally in road traffic and the latter can always be switched on outside of road traffic, e.g. on construction sites, closed tracks, forest roads and in all situations that require maximum lighting. In addition to the two different power modes, the panels of the Skylord product family feature a completely redesigned beam, which, according to the manufacturer, carries the traditional combined beam further and also illuminates wider right from the front of the vehicle. The exceptional beam has been achieved by combining powerful LEDs with a new type of innovative reflector technology, which enables both effective low-beam lighting and visibility far ahead.

True to Strands products, the Skylord panels also feature both an orange and white parking light, which runs elegantly along the bottom of the panel. The modern and stylish parking light combined with a contemporary design, beautifully visible reflectors through the lens and a dark profile create an additional light that is suitable for installation on the front of any vehicle. In addition to its great appearance, the Skylord panels are also designed to withstand the use of professional drivers: the durable aluminum frame is machined from a single piece and has no screw holes . This gives the light exceptionally good protection against corrosion, vibration and other external stresses. In addition, the solid frame ensures that no water, dirt or moisture in any form can accumulate inside the panel and reduce its service life.

Skylord auxiliary light panels have a built-in relay and a power cable up to 250 cm long, which makes installation easier even in large vehicles. In addition, the panels come with a Strands Pro wiring harness, which enables Plug&Play installation with the XBB Dongle&PowerUnit switching relay. The wiring harness has a ready-made switch that allows the parking light to be easily switched on or off. The panels are equipped with a wide operating voltage (10-32V), so installation is possible in both 12V and 24V systems. Extended five-year (60 months) warranty!

Basic delivery content

• Strands Skylord 20"
• End fixing feet
• Width-adjustable lower legs
• Strands Pro wiring harness
• Connection and installation instructions (EN)

Delivery content (Light + XBB Dongle & PowerUnit)

• Basic delivery content
• Connection relay XBB Dongle & PowerUnit

Specifications

• Brand and model: Strands Skylord 20"
• Intended use: As an additional light in cars / work machines
• Operating voltage: 10 - 32 V
• Reference number: 2x20
• Manufacturer's stated power consumption: @ 12V / @ 24V
• Manufacturer's declared power: 170 W (Xperience) / 74 W (Road mode)
• Manufacturer's declared luminous efficacy: 15800 lm (Xperience) / 7600 lm (Road mode)
• Manufacturer's stated range: 780 m @ 1 lux (Xperience) / 400 m @ 1 lux (Road mode)
• Manufacturer's stated color temperature: 5700 K
• Mounting: End legs, width-adjustable bottom legs
• Connector: No connector, straight wires
• Cable length: 250 cm
• Dimensions: 506 x 67.45 x 77.95 mm (Width/Height/Depth)
  • Height with foot: 73.85 mm
• Other: White and orange parking light
• IP rating: IP68/IP69K
• Approvals: EMC: ECE: R148, R149*
  • *Road traffic approval does not apply to Xperience mode
• Warranty: 60 months

Installation guide

Coupling

• Black: Ground (-)
• Red: Power (+)
• White: White parking light (+)
• Yellow: Orange parking light (+)
• Grey: + Signal wire connect to +VDC

Switching between Xperience mode and E-mode: When the auxiliary lights are switched on for the first time, they will light up in Xperience mode (not approved for road use). To activate the E-approved mode, turn off the light for at least 5 seconds, then turn it on for 20 seconds. Then turn the light off and flash the light on 10 times within a 6-8 second time window. Then turn the light on again and let it burn for 20 seconds, after which the mode will change automatically. To switch back from E-mode to Xperience mode, repeat the same process.

Manufacturer's connection instructions : Strands Skylord manual (opens in a new window).