Led bar LAZER Linear-18 Elite i-LBA - Straight / 53 cm / 135W / Ref. 17.5

The Lazer Linear-18 Elite i-LBA is an efficient, robust and versatile led bar. Some of the led bar's 48 total LEDs shine straight ahead and create a slightly narrower light cone, giving the Linear-18 Elite i-LBA an impressive range of 522 m (@ 1 lux). The rest of the diodes, on the other hand, shine wider, up to 60°, to illuminate the roadsides at short and medium distances. With a light cone that shines both far and wide in combination with a light flux of up to 18,000 lm, a comfortable and safe driving experience with good visibility is ensured.

New to the i-LBA model is Lazer's all-new Intelligent Low Beam Assist technology, which makes the led bar more practical compared to traditional led bars: when the vehicle's high beams are turned off, the led bar enters low beam assist mode (if the mode is activated). In this assistant mode, the led bar's forward-directed LEDs are turned off, but the diodes that shine broadly in the wall branch remain lit. This is made possible thanks to the led bar's two sensors that read the road surface 30 times per second and record e.g. oncoming traffic, reflective traffic signs and street lamps and other reflective surfaces.

A 3-second delay margin has also been included for low beam assist mode to be switched on, so that it does not cycle on and off in such a way that it can be perceived as flashing when passing objects detected by the sensor. After the margin has passed the car, it returns to low beam assist mode or high beam if the car's own high beam is on. This function can also be turned off with a switch in the wiring harness. In addition to continuous reading, the sensors are continuously calibrated, which enables the reading of the surrounding conditions, for example changing weather or light conditions, or even dirt on the led bar.

Note! The extra light's E-boost mode, which gives maximum effect, is not E-approved. The low beam assistant system, on the other hand, is so new that it is not yet regulated, which means that it is also not officially approved. In Sweden, we lack requirements for Emarking, but many extra light ramps sold here still have the mark because they are manufactured for the entire European market

Contents (1 pc)

• Lazer Linear-18 Elite
• Connection and installation instructions
• Anti-theft brackets
• End brackets
• Low Beam Assist Relay Kit
  • Note! Adjustable rail brackets are not included. If desired, they (2 pcs) can be purchased separately here: Rail Mount, Lazer Center Mounting Kit, Linear

Contents (1 pc - Complete package with flush mounting)

• Contents (see above)
• Adjustable Additional light holder for EU license plate, Purelux
• Stabilizer for lightbar, Purelux

Technical specification

• Brand and model: Lazer Linear 18 Elite i-LBA (Intelligent Low Beam Assist)
• Area of use: Additional light for car/vehicle
• Reference number: 17.5 (E-boost and low beam assistant are not approved)
• Manufacturer's reported luminous flux (E-Boost / E-approved): 18,000 lm / 5538 lm
• Manufacturer's reported range (E-Boost / E-approved): 522 m @ 1 lux / 286 m @ 1 lux
• Beam width (lateral): 64°
• Color temperature: 5000 K
• Power (E-Boost / E-approved): 135 W / 43 W
• Current consumption (E-Boost / E-approved): 10.4 A / 13.2 A @14.4V
• Operating voltage: 10-32V
• Lifespan: Approx. 50,000 hours
• Weight: 1090 g
• Dimensions: 532 x 62 x 40 mm (Width x Height x Depth)
• Contact: DTP-4
• Materials: Aluminum, polycarbonate lens
• Protection class: IP67
• E-approvals: ECE R 112 (Does not apply to Intelligent Low Beam Assist or E-Boost mode)
• Country of manufacture: United Kingdom
• Warranty: 60 months