LED strip Interior light OSRAM LEDambient Interior Strip Kit, White
Easy-to-mount LED strip for the car's interior. Stylish neutral white color (4500K). 12V, fixed installation in the car.
Product ratings
5.0
number of ratings 3- Bought a Toyota iQ that has a horrible interior light, so this Osram lightstrip saved the car!Christopher G 15.1.2021
0
0
Product Faq
Easy-to-mount LED strip for the car's interior. Stylish neutral white color (4500K). 12V, fixed installation in the car.
The Osram LEDambient Interior Strip Kit contains 2 x 150 cm long LED strips. Stylish interior detail to illuminate the interior of the car. The loops are connected directly to the car's electrical system, so that they can be switched on with a separate switch or e.g. at the same time as the interior lights. The length of the LED loops is 150 cm/piece and they can be cut to the desired length. Easy to install and a stylish way to increase travel comfort and take your decor to the next level! The color of the loops is a modern, stylish natural white shade (4500K).
The loops are glued to the desired location (e.g. above the footwell, on the roof, under the seats), after which the power cord is connected to the car's 12V system. If you want, you can also mount a switch (not included).
Content
- 2 x white LED loop, 150 cm / pc
- 2 x cleaning cloth
- 4 x theft contact
Technical specification
- Product: Interior lighting Osram LEDambient Interior Strip Kit
- Area of use: Lighting in the car's interior
- Color: Neutral white, 4500 K
- Luminous flux: 900 lm / loop
- Number of diodes: 90 pcs / loop
- Operating voltage: 12 V
- Power consumption: 12 W
- Connects directly to the car's 12V system
- Warranty: 24 months
Quick guide
Open the package and take out all the parts included. Choose suitable places for mounting and test mount (without attaching the loops) to ensure they reach the power source.
After doing the above, use the provided cloth and wipe clean the surface where the loops will be attached. Remove the protective film from the loop. Place the loop where it will attach, heat with a hair dryer for about 20 seconds (NOTE! Not too hot!) and press it firmly.
The easiest way to connect the loops to the electrical system is to "steal" the power from the car's interior lights using the provided steal contacts. However, it is not necessarily the best solution.



