Auxiliary light holder for EU-plate STRANDS, for 55 cm LED ramp
Extra light holder for mounting LED ramps. Fits approx. 55 cm-long LED ramps.
Product ratings
4.5
number of ratings 20- Passat perfekt till min S560. Något dyr för vad det är. Men den gör sitt jobb.William T 7.8.2024
0
0
- Har hatt denne i akkurat et år nå og den har begynt å rust noe voldsomt og lakken preller av. Gir den kun to stjerner da passformen var bra. Hadde for...Kjell-tomas Ø 26.7.2023
0
0
- Snabbt enkel braÅsa helena P 21.9.2022
0
0
- En stabil hållare som uppfyller mina behov. Passar perfekt till PURELUX S560 56cm. Rekomenderas starkt!Martin B 19.1.2022
0
0
- Lättmonterad och låg vikt, passar bra med Purelux 56cm med brickor imellan på sidorna.Thom B 22.12.2021
0
0
- Oli kyllä pettymys kun ei EU rekisterikilpi peitä kiinnitys taustaa. Jonkin verran jouduin muokkaamaan rautaa että sain valoni siihen sopimaan ja kun ...Petteri L 24.9.2021
0
0
- Todella hyvä ostos. Lisävalon kiinnitys oli nopea ja kävi suoraan valon kiinnityspisteisiin. Kiinnitys auton puskuriin oli suorastaan helppoa.Jari M 7.2.2021
0
0
- Perfekt för vårt behov, ska sitta på en Volvo v90cc infälld nedanför nummer plåten!Patrick L 9.12.2020
0
0
- Var lite för långt mellan fästena för Purelux Road Curve som jag köpte den till men var lätt att böja in lite så den satt ordentligt. Känns rejäl.Markus L 19.10.2020
0
0
- Passade utmärkt ihop med rampen med några brickor emellan.Charlie E 9.11.2019
0
0
Product Faq
Extra light holder for mounting LED ramps. Fits approx. 55 cm-long LED ramps.
Extra light holder for mounting LED ramps. The LED ramp was attached to the short side of the bracket. Fits many 22" LED ramps on the market (approx. 55 cm long).
Gives a neater mounting at the front of the car, as it is easier to fold the LED ramp into the grill with this.
Tip! If the ramp is a few cm too short, it is easy to either put something in between or bend the plate slightly.
- Colour: Black
- Length: 510 mm
- Height: 100 mm
- Max. length: 567 mm
Easy assembly:
- Unscrew the number plate from the car.
- Mount the light ramp on the number plate holder and screw back with the number plate holder behind the sign. If you install a light ramp and wish to have it mounted underneath, you can turn the holder over.
Fits most cars where the license plate is not heavily recessed and where the bumper does not protrude above the license plate. You may need spacers to put behind the bracket to get the mount out.
Tip! If the mounting holes behind the license plate do not fit, it is easy to drill your own holes.
